ExamTopics Logo
Mail Us[email protected]
Menu
 

NS0-180 Actual Exam Questions

Last updated on Dec. 11, 2024.
Vendor:Netapp
Exam Code:NS0-180
Exam Name:NetApp Certified Storage Installation Engineer Clustered Data ONTAP
Exam Questions:94
97% Passed the exam with this material
 

Topic 1 - Single Topic

Question #1 Topic 1

You want to create a data volume on aggr0 and you receive a message with the following warning:
''Warning: You are about to create a volume on a root aggregate. This may cause severe performance or stability problems and therefore is not recommended. Do you want to proceed?''
What is the reason for this severe performance or stability problem?

  • A. Controller failover and storage failover are separate processes that must occur in parallel, otherwise problems will arise.
  • B. The performance load generated by the data volume can be very strong, so it should not be shared with vol0 on aggr0, requiring a separate aggregate for it.
  • C. The performance load generated by the vol0 cannot be shared with any other volume on aggr0, requiring a dedicated aggregate for it.
  • D. Controller failover and storage failover are separate processes that must occur at different times, otherwise problems will arise.
Reveal Solution Hide Solution   Discussion  

Correct Answer: B 🗳️
One possibly cause is Disk I/O contention on the data volume.
The root volume in Cluster-Mode is used to store and update various tables of the replicated database. Crucial information regarding the locations of LIFs, volumes, aggregates, and different jobs required to run in the cluster are stored in these tables. If a root aggregate has very busy data volumes, the disks in the aggregate will experience higher latency. When a node is unable to update its copy of the replicated database fast enough, it will consider itself unhealthy and stop serving all the data until it can catch up. This is extremely disruptive and affects all the volumes on the node, even if the cause is related to the data volumes stored on the root aggregate only.
Reference: Why is a warning displayed when attempting to create one or more data volumes in the root aggregate in Data ONTAP Cluster-Mode? https://kb.netapp.com/support/index?id=3013563&page=content&locale=en_US

Question #2 Topic 1

You have completed a clustered Data ONTAP installation for a new customer. You are now ready to hand off the system to the customer.
Which three actions should you take at this stage in the installation process? (Choose three.)

  • A. Show the customer how to open a case with NetApp Support.
  • B. Demonstrate System Manager and its functionality.
  • C. Tell the customer to call their sales representative if there are further questions.
  • D. Tell the customer you are finished and then leave the site.
  • E. Show the customer how to set up a support account.
Reveal Solution Hide Solution   Discussion  

Correct Answer: ABE 🗳️

Question #3 Topic 1

What happens to the NTP configuration in clustered Data ONTAP 8.3 when a node joins a cluster?

  • A. A node that joins a cluster has a separate NTP service.
  • B. A node that joins a cluster automatically adopts the NTP configuration of the cluster.
  • C. A node that joins a cluster must be manually configured in the NTP.
  • D. A node that joins a cluster must reboot before running the NTP service.
Reveal Solution Hide Solution   Discussion  

Correct Answer: B 🗳️
A node that joins a cluster automatically adopts the NTP configuration of the cluster.
Reference: How to configure and troubleshoot NTP on clustered Data ONTAP 8.2 and later using CLI https://kb.netapp.com/support/index?page=content&id=1014787

Question #4 Topic 1

You are assigned to install five DS2246 with twenty-four 400 GB SSDs per shelf to a single node system.
According the NetApp, which statement is correct?

  • A. You cannot install five SSD shelves to one System.
  • B. You need at least two stacks.
  • C. You need at least three stacks.
  • D. You can put all shelves in one stack.
Reveal Solution Hide Solution   Discussion   2

Correct Answer: D 🗳️
Up to 10 shelves are supported per stack for the DS2246, so we one stack is enough as we only have five shelves (DS2246s).
Reference: Making the Move from FC to SAS Storage
http://www.netapp.com/as/communities/tech-ontap/tot-fc-sas-1101-as.aspx

file Viewing page 1 out of 24 pages.
Viewing questions 1-4 out of 94 questions
Next Questions
Browse atleast 50% to increase passing rate cup
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago