Exam 350-501 topic 1 question 350 discussion

Actual exam question from Cisco's 350-501

Question #: 350
Topic #: 1

Refer to the exhibit. An engineer ran this show telemetry command to view subscription SUB11 on RouterX. The engineer then decided that RouterY should provide the same output for sensor group SGroup13 as RouterX. The engineer cannot access RouterX to copy its configuration No access lists on the router block user access. Which configuration must the engineer apply on RouterY to provide the same output from the show telemetry command?

A. RouterY(config)# telemetry model-driven
RouterY(config-model-driven)# subscription SGroup13
RouterY(config-model-driven-subs)# sensor-group-id SGroup13 sample-interval 20000
B. RouterY(config)# telemetry model-driven
RouterY(config-model-driven)# sensor-group SGroup13
RouterY(config-model-driven-snsr-grp)# sensor-path openconfig-interfaces:interfaces/interface
C. RouterY(config)# telemetry model-driven
RouterY(config-model-driven)# destination-group SUB11
RouterY(config-model-driven-dest)# address family ipv4 172.16.10.1 port 22471
RouterY(config-model-driven-dest-addr)# encoding self-describing-gpb
RouterY(config-model-driven-dest-addr)# protocol tcp
D. RouterY(config)# telemetry model-driven
RouterY(config-model-driven)# subscription SUB11
RouterY(config-model-driven-subs)# sensor-group-id SGroup13 sample-interval 20000
RouterY(config-model-driven-subs)# destination-id DGroup1

Show Suggested Answer

Suggested Answer: B 🗳️

by Samarjit1983 at Feb. 22, 2023, 12:25 a.m.

Comments

Submit Cancel

enco

11 months ago

Selected Answer: B

We're being asked for the sensor group config, not the subscription or destination group

upvoted 1 times

...

sushil_bhattacharjee

1 year, 3 months ago

Selected Answer: B

Answer: B Example: Router(config)#telemetry model-driven Router(config-model-driven)#sensor-group ADT-EVENT Router(config-model-driven-snsr-grp)#sensor-path Cisco-IOS-XR-adt-oper:adt/adt-output Where - ADT-EVENT is the name of the sensor-group Cisco-IOS-XR-adt-oper:adt/adt-output is the sensor path from where data is streamed. https://www.cisco.com/c/en/us/td/docs/iosxr/cisco8000/telemetry/711x/configuration/guide/b-telemetry-cg-8000-711x/AI-driven-telemetry.html

upvoted 1 times

...

sushil_bhattacharjee

1 year, 3 months ago

upvoted 1 times

...

thejag

2 years ago

B - this is the configuration for SENSOR GROUP that we need. We do not need the configuration for the subscription that we see in the other options

upvoted 1 times

...

12_sdeEQ

2 years, 2 months ago

B is Correct one

upvoted 1 times

...

DUsoo

2 years, 3 months ago

Selected Answer: B

B looks correct

upvoted 2 times

...

Samarjit1983

2 years, 4 months ago

https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/vpn/62x/b-l2vpn-cg-ncs5500-62x/b-l2vpn-cg-ncs5500-62x_chapter_0111.html#concept_2BF2259AE4EE4942BC1B8719D8768AEB

upvoted 1 times

thejag

2 years ago

This is for a different question!

upvoted 1 times

...