Two switches are interconnected using interface GigabitEthernet0/0 on both sides. While configuring one of the switches, a network engineer receives the logging message. Which action resolves this issue?
A.
Block VLAN1 on the trunk interface GigabitEthernet0/0.
B.
Configure interface GigabitEthernet0/0 as an access port.
C.
Configure interface GigabitEthernet0/0 as a trunk port.
D.
Shutdown interface GigabitEthemet0/0 and bring it back up.
Who the F chose B? Are you high?
Why would you want BPDUs sent on an access port?
Yes C is the answer, but you also have to remove bpduguard on the port and shut/no shut to bring it back up. so D is also an answer but only after you do C first.
The logging message indicates that a Bridge Protocol Data Unit (BPDU) was received on a non-trunk port, which suggests that the interface GigabitEthernet0/0 is not configured as a trunk port but is receiving 802.1Q tagged frames. To resolve this issue, you should configure the interface as a trunk port.
Two switches together... means you need trunk ports on both.. that resolves the issue, no if and or buts about it. any justifications for other answers means you need to go study more. This is fundamental.
It's obviously C.
The NON TRUNK G0/0 port on our switch is receving a TRUNK DOT1Q BPDU from the switch at the other end of the link. G0/0 on our switch is an Access port in VLAN 1. The port on the switch at the other end of the link is a trunk port. So the fix is to configure G0/0 on our switch as TRUNK.
Admins, please fix the answer.
this is a stupid question because it ask to fix problem but don't say how. I think the answer is correct because it dont talk of vlan.
If you need only one vlan the answer is correct.
The answer is 100% B here's why
On the Output Switch we received that error code, the Error code CLEARLY states that we received a NON_TRUNK and that we received a BPDU from an 802.1Q on our Trunk Interface g0/0 which means we are set to Trunk.
You can't set to Trunk again because we are already set to trunk, if we switchport mode access the link will become operational.
This section is not available anymore. Please use the main Exam Page.350-401 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
mgiuseppe86
Highly Voted 1 year, 8 months agobullett00th
Highly Voted 2 years, 2 months agoebulating
Most Recent 10 months ago[Removed]
1 year agoShri_Fcb10
1 year agoIgorLVG
1 year, 2 months agoAldebeer
1 year, 6 months agoCCNPWILL
1 year, 8 months agoAsombrosso
1 year, 9 months agoeddgg
1 year, 10 months agodjedeen
1 year, 10 months agoBobbyFlash
1 year, 10 months agoBurik
1 year, 11 months agoChiaretta
2 years, 1 month agoLeoveil
2 years, 2 months agoClauster
2 years, 2 months agoClauster
2 years, 2 months agocuda74
2 years, 3 months ago