Exam 200-301 topic 1 question 862 discussion

Well, if he is an architect he shouldn't really be asking me this in CCNA

Resposta B parece correta! "When a FlexConnect access point can reach the controller (referred to as the connected mode), the controller assists in client authentication. When a FlexConnect access point cannot access the controller, the access point enters the standalone mode (local authentication) and authenticates clients by itself." ... "In the Advanced tab, select the FlexConnect Local Switching check box to enable local switching for the WLAN." https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_flexconnect.html#21265:~:text=tab%2C%20select%20the-,FlexConnect%20Local%20Switching,-check%20box%20to

The action that must be taken to complete the request of processing client data traffic without sending it to the WLC is to enable FlexConnect Local Switching. FlexConnect Local Switching (also known as "local switching" or "central switching") is a feature of Cisco wireless networks that allows for client traffic to be switched locally at the access point (AP) rather than being sent to the wireless LAN controller (WLC) for processing. This can improve network performance and reduce the load on the WLC.

correct