ExamTopics Logo
Mail Us[email protected]
Menu
Cisco Discussions
exam questions

Exam 200-301 All Questions

View all questions & answers for the 200-301 exam
Go to Exam

Exam 200-301 topic 1 question 875 discussion

Actual exam question from Cisco's 200-301
Question #: 875
Topic #: 1
[All 200-301 Questions]



Refer to the exhibit. The SW1 and SW2 Gi0/0 ports have been preconfigured. An engineer is given these requirements:
• Allow all PCs to communicate with each other at Layer 3.
• Configure untagged traffic to use VLAN 5.
• Disable VLAN 1 from being used.

Which configuration set meets these requirements?

  • A. SW1#
    interface Gi0/1
    switchport mode trunk
    switchport trunk allowed vlan 5,7,9,108
    switchport trunk native vlan 5

    interface Gi0/2
    switchport mode trunk
    switchport trunk allowed vlan 5,7,9,108

    SW2#
    interface Gi0/1
    switchport mode access
    switchport access vlan 7

    interface Gi0/7
    switchport mode trunk
    switchport trunk allowed vlan 7,9,108
  • B. SW1#
    interface Gi0/1
    switchport mode trunk
    switchport trunk allowed vlan 5,7,9,108
    switchport trunk native vlan 5

    interface Gi0/2
    switchport mode access
    switchport trunk allowed vlan 7,9,108

    SW2#
    interface Gi0/1
    switchport mode access
    no switchport access vlan 1
    switchport access vlan 7

    interface Gi0/7
    switchport mode trunk
    switchport trunk allowed vlan 7,9,108
    switchport trunk native vlan 5
  • C. SW#1 -
    interface Gi0/1
    switchport mode trunk
    switchport trunk allowed vlan 5,7,9,108
    switchport trunk native vlan 5

    interface Gi0/2
    switchport mode trunk
    switchport trunk allowed vlan 5,7,9,108

    SW2#
    interface Gi0/1
    switchport mode access
    switchport access vlan 7

    interface Gi0/7
    switchport mode trunk
    switchport trunk allowed vlan 5,7,9,108
    switchport trunk native vlan 5
  • D. SW1#
    interface Gi0/1
    switchport mode trunk
    switchport trunk allowed vian 5,7,9,108

    interface Gi0/2
    switchport mode trunk
    switchport trunk allowed vlan 7,9,108

    SW2#
    interface Gi0/1
    switchport mode trunk
    switchport trunk allowed vlan 7

    interface Gi0/7
    switchport mode trunk
    switchport trunk allowed vlan 5,7,9,108
Show Suggested Answer Hide Answer
Suggested Answer: C 🗳️
by Channaveera at March 19, 2023, 10:21 a.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
dropspablo
Highly Voted 2 years, 1 month ago
Selected Answer: C
Letter A - Two mismatch (between SW1 and SW2): Native Vlan and Vlan Allowed. Letter B - A mismatch (between SW1 and SW2): Vlan Allowed. Letter C - Working, best option! Letter D - Native Vlan 5 not configured. (*wrong command vian)
upvoted 9 times
...
bymrdas
Most Recent 1 year, 1 month ago
Selected Answer: C
C é a resposta correcta
upvoted 2 times
...
VanessaR05
1 year, 4 months ago
For me is letter B because it's the only option that has mention the topic "Disable VLAN 1 from being used."
upvoted 1 times
Lukai
1 year ago
It won’t be allowed to use if you don’t allow it. So no need to put a command to disable it I guess? Plus the access port and trunk port are stated incorrectly on B. Correct me if I’m wrong
upvoted 1 times
...
Lukai
1 year ago
B also put switchport trunk allowed vlan after making the port as an access port
upvoted 1 times
...
...
a67c04a
1 year, 5 months ago
Selected Answer: C
It´s C
upvoted 2 times
...
JJY888
2 years, 2 months ago
Scratch my comment from the record, please.
upvoted 2 times
...
JJY888
2 years, 2 months ago
Selected Answer: B
It can't be C. Option B is the only answer with the PC on SW1 connected as an access port.
upvoted 4 times
LeonardoMeCabrio
2 years, 1 month ago
B cannot be correct. A configuration for access port at vlan 1 exists.
upvoted 2 times
...
[Removed]
2 years, 1 month ago
Yes, it can be C
upvoted 2 times
...
...
Channaveera
2 years, 4 months ago
Why SW1 is Trunk. Switch to router port is enabled Trunk only for router on stick. interface Gi0/2 switchport mode trunk switchport trunk allowed vlan 5,7,9,108
upvoted 1 times
fra130186
2 years, 1 month ago
Allow all PCs to communicate with each other at Layer 3, that's y
upvoted 1 times
...
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel