Exam 300-410 All Questions

View all questions & answers for the 300-410 exam

Exam 300-410 topic 1 question 424 discussion

Actual exam question from Cisco's 300-410

Question #: 424
Topic #: 1

Refer to the exhibit. Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and 192.168.4.0/24 networks use the Hong Kong router as the preferred route. Which set of configurations accomplishes this task?

A. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/1
ip policy route-map PBR1
B. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/3
ip policy route-map PBR1
C. access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit ip 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/3
ip policy route-map PBR1
D. access-list 101 permit ip 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit ip 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/1
ip policy route-map PBR1

Show Suggested Answer

Suggested Answer: B 🗳️

by HungarianDish_111 at May 19, 2023, 3:05 p.m.

Comments

Submit Cancel

inteldarvid

Highly Voted 1 year, 11 months ago

i dont see interface

upvoted 12 times

bk989

10 months, 3 weeks ago

interface is e0/3 in image

upvoted 1 times

...

dapardo

1 year, 1 month ago

Im not able to see the interface neither, if the interface connected to Muskat is ethernet0/3, then the right answer is B

upvoted 3 times

...

Pietjeplukgeluk

1 year, 4 months ago

A or B, the image was not to clear. So indeed without seeing the interface it can be A or B as far as in can see.

upvoted 1 times

...

Brahim90

Most Recent 3 months, 2 weeks ago

Selected Answer: B

Given answer B is correct int E0/3.

upvoted 1 times

...

CiscoTerminator

4 months, 2 weeks ago

Selected Answer: A

this question is crazy ....how the hell do you make everything visible but the interface!

upvoted 3 times

...

Sammy3637

5 months ago

Selected Answer: B

B is correct tip:use 300% zoom to see the interface e0/3 lol

upvoted 3 times

...

[Removed]

10 months, 3 weeks ago

Selected Answer: B

B is corerct

upvoted 1 times

...

[Removed]

10 months, 4 weeks ago

Selected Answer: B

B is corerct

upvoted 1 times

...

bk989

1 year, 3 months ago

"The administrator must configure Bangkok in such a way that Telnet traffic" Only A and B have port 23 (telnet) in ACL. In B the PBR is on the interface pointing 192.168.3.0/24 and 192.168.4.0/24 networks, hence it can policy route the traffic. If it was placed on other interface it may not policy route all of the traffic coming from 192.168.3.0/24 and 192.168.4.0/24 networks.

upvoted 2 times

...