Exam 300-430 topic 1 question 198 discussion

AP group: The AP group configuration on the WLC determines the VLAN mappings for WLANs. By configuring the AP group to allow dynamic VLAN assignment, Cisco ISE can assign users to specific subnets (VLANs) based on their credentials. Why not the other options? A. WLAN VLAN: This is used for static VLAN assignment and does not support dynamic assignment by ISE. B. VLAN ACL: This is used for access control and does not affect VLAN assignment. C. RF group: This is used for radio frequency management and is unrelated to VLAN assignment. Thus, the correct mapping to modify is the AP group to enable dynamic VLAN assignment by Cisco ISE.

According to AI A is correct The AP group configuration allows a network engineer to apply specific settings and policies to a group of access points. In this scenario, modifying the AP group would be necessary to enable the Cisco ISE to dynamically assign the subnet based on user credentials. By configuring the AP group, the network engineer can define the necessary parameters and policies for the FlexConnect AP to communicate with the Cisco ISE for dynamic subnet assignment.

WLAN VLAN mapping is the answer. D. is incorrect there is no dynamic vlan configuration done there. You need to add the VLANs that you will dynamically assign to the WLAN VLAN mapping.