Exam 300-815 topic 1 question 97 discussion

voice translation-rule 1000 rule 1 /\+/ // ! voice translation-profile STRIP-PLUS translate CALLED 1000 How did this answer get SOOO wrong. You have to use the \ "backslash- slants leftward or backward" as an escape character before you can use a +. EVERY IOSXE/IOS out there will ding you for not doing this. Also....this is the number that is DIALED...not the number that did the DIALING. So its CALLED, not calling. And of course, the rule is referenced by the number 1000.

straight out of my CUBE router... HQ-Cube-RTR#config t Enter configuration commands, one per line. End with CNTL/Z. HQ-Cube-RTR(config)#no voice translation-rule 1000 HQ-Cube-RTR(config)#voice translation-rule 1000 HQ-Cube-RTR(cfg-translation-rule)#rule 1 /\+/ // HQ-Cube-RTR(cfg-translation-rule)# HQ-Cube-RTR(cfg-translation-rule)#exit HQ-Cube-RTR(config)#exit HQ-Cube-RTR#test voice translation-rule 1000 +12105551234 Matched with rule 1 Original number: +12105551234 Translated number: 12105551234 Original number type: none Translated number type: none Original number plan: none Translated number plan: none "Rule 1 \/+/ //" you need the backslash to null out the + as a special character \ Escape the special meaning of the next character.

rule 1 /+/ // searches the dialed string for ‘+’ and changes it to null (i.e., removes it) Last line should be: translate called 1000 https://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/64020-number-voice-translation-profiles.html#toc-hId-672735434