ExamTopics Logo
Mail Us[email protected]
Menu
Cisco Discussions
exam questions

Exam 300-620 All Questions

View all questions & answers for the 300-620 exam
Go to Exam

Exam 300-620 topic 1 question 198 discussion

Actual exam question from Cisco's 300-620
Question #: 198
Topic #: 1
[All 300-620 Questions]

A network engineer implements an L3Out inside the Cisco ACI fabric. The engineer plans to connect a Cisco ACI leaf switch to a switch outside of the Cisco ACI fabric to exchange routes via a routing protocol. The external switch interface is configured with IP address 192.168.15.1/30. The ACI engineer wants to use a routing protocol that uses a hierarchical network design. The Cisco ACI fabric should use the L3Out to access the Internet. Which set of steps must be taken to meet these requirements?

  • A. Set up the BGP Protocol policy with the appropriate Autonomous System number.
    Create the Routed Outside object and Node profile, selecting BGP as the routing protocol.
    Build the Interface profile, selecting SVI and the appropriate VPC.
    Configure the 0.0.0.0/32 network as part of the External Network object.
  • B. Set up the EIGRP Protocol policy with the selected Autonomous System number.
    Set up the Routed External Network object and Node profile, selecting EIGRP.
    Create the Switch profile, selecting VPC and the appropriate interfaces.
    Create the default network and associate it with the Routed Outside object.
  • C. Set up the EIGRP Protocol policy with the selected Autonomous System number.
    Configure an Interface policy and an External Bridged Domain.
    Create an External Bridged Network using the configured VLAN pool.
    Build the Leaf profile, selecting Routed Sub-Interface and the appropriate VLAN.
  • D. Configure the OSPF Protocol policy with an area of 0.
    Create the Routed Outside object and Node profile, selecting OSPF as the routing protocol.
    Build the Interface profiles, selecting Routed Interface and the appropriate interface.
    Set up the External Network object with a network of 0.0.0.0/0.
Show Suggested Answer Hide Answer
Suggested Answer: D 🗳️
by crooks_1988 at Sept. 9, 2023, 8:09 p.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
samfab
2 months, 3 weeks ago
Selected Answer: D
D as it uses routed Interface
upvoted 1 times
...
crooks_1988
8 months ago
Answer is D OSPF is a hierarchical routing protocol and this is key "Set up the External Network object with a network of 0.0.0.0/0."
upvoted 1 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago