Exam 300-135 topic 12 question 3 discussion

Actual exam question from Cisco's 300-135

Question #: 3
Topic #: 12

The implementations group has been using the test bed to do a "˜proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at
209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following question.
What is the solution to the fault condition?

A. Under the global configuration, delete the no ip dhcp use vrf connected command.
B. Under the IP DHCP pool configuration, delete the default -router 10.2.1.254 command and enter the default-router 10.1.4.5 command.
C. Under the IP DHCP pool configuration, delete the network 10.2.1.0 255.255.255.0 command and enter the network 10.1.4.0 255.255.255.0 command.
D. Under the IP DHCP pool configuration, issue the no ip dhcp excluded-address 10.2.1.1 10.2.1.253 command and enter the ip dhcp excluded-address 10.2.1.1 10.2.1.2 command. D

Show Suggested Answer

Suggested Answer: Explanation 🗳️
On R4 the DHCP IP address is not allowed for network 10.2.1.0/24 which clearly shows the problem lies on R4 & the problem is with DHCP

by rfrometa at Jan. 19, 2020, 11:14 p.m.

Comments

Submit Cancel

rfrometa

5 years, 5 months ago

this configuration is not under the pool: R1(config)#ip dhcp excluded-address 192.168.10.1

upvoted 1 times

...

rfrometa

5 years, 5 months ago

D is the q\answer

upvoted 1 times

...