Exam 300-135 topic 16 question 3 discussion

Actual exam question from Cisco's 300-135

Question #: 3
Topic #: 16

The implementations group has been using the test bed to do a "˜proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at
209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?

A. In Configuration mode, using the interface range Fastethernet 1/0/1 "" 2, then switchport mode access vlan 10 command.
B. In Configuration mode, using the interface range Fastethernet 1/0/1 "" 2, then switchport access mode vlan 10 command.
C. In Configuration mode, using the interface range Fastethernet 1/0/1 "" 2, then switchport vlan 10 access command.
D. In Configuration mode, using the interface range Fastethernet 1/0/1 "" 2, then switchport access vlan 10 command. D

Show Suggested Answer

Suggested Answer: Explanation 🗳️
The problem here is that VLAN 10 is not configured on the proper interfaces on switch ASW1.

by rfrometa at Jan. 21, 2020, 2:06 a.m.

Comments

Submit Cancel

rfrometa

5 years, 5 months ago

D: switchport access vlan 10

upvoted 1 times

...