Which cable type must be used when connecting two like devices together using these criteria? • Pins 1 to 3 and 2 to 6 are required. • Auto detection MDI-X is unavailable.
C. crossover
Explanation:
When connecting two like devices together (e.g., two computers or two switches) directly without an intermediate device like a hub or a switch, and auto detection MDI-X (Media Dependent Interface with Crossover) is unavailable, a crossover cable is used. In a crossover cable, the transmit (TX) pins on one end are connected to the receive (RX) pins on the other end, and vice versa.
The criteria mentioned, where Pins 1 to 3 and 2 to 6 need to be connected, align with the characteristics of a crossover cable.
A. Straight-through cables are typically used to connect different types of devices, like a computer to a switch or router.
B. Console cables are used for configuring and managing networking devices through a console port.
D. Rollover cables are used for connecting a computer's serial port to the console port of a networking device like a router or switch for initial configuration.
This section is not available anymore. Please use the main Exam Page.200-301 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
16BitRun
Highly Voted 11 months, 1 week agopicho707
Highly Voted 11 months, 1 week ago[Removed]
Most Recent 7 months, 3 weeks agoa67c04a
9 months, 3 weeks agoAA4534
11 months, 2 weeks ago