Exam 300-610 topic 1 question 212 discussion

Actual exam question from Cisco's 300-610

Question #: 212
Topic #: 1

An engineer must connect a new storage appliance to a Cisco UCS domain.
• The storage array must be directly attached to Cisco UCS fabric interconnects.
• Connectivity between UCS and SAN must use 10 Gigabit Ethernet.
• The solution should use lossless QoS system class.
• Network and storage traffic must traverse different uplinks.

Which port types must be used between the fabric interconnect and the storage appliance?

A. FCoE storage port -
appliance port
B. FcoE uplink port -
Ethernet uplink port
C. Fibre Channel storage port -
appliance port
D. Fibre Channel storage port -
Ethernet uplink port

Show Suggested Answer

Suggested Answer: A 🗳️

by Fcpoultry at Jan. 14, 2024, 8:48 a.m.

Comments

Submit Cancel

zeppie

2 months, 1 week ago

Selected Answer: A

Correct is A. The appliance port is designed to connect Ethernet-based storage arrays.

upvoted 2 times

...

lurker8000

7 months ago

actually I'll go with B

upvoted 1 times

...

lurker8000

7 months, 1 week ago

Agree on A for this one.

upvoted 1 times

...

Fcpoultry

1 year, 5 months ago

Selected Answer: A

"The switch provides two default system classes: a no-drop class for lossless service (class-fcoe) and a drop class for best-effort service (class-default). You can define up to four additional system classes for Ethernet traffic." https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/qos/421_n2_1/b_Cisco_Nexus_5000_Series_NX-OS_Quality_of_Service_Configuration_Guide_Rel_421_N2_1/Cisco_Nexus_5000_Series_NX-OS_Quality_of_Service_Configuration_Guide_Rel_421_N2_1_chapter3.html

upvoted 2 times

...