ExamTopics Logo
Mail Us[email protected]
Menu
Cisco Discussions
exam questions

Exam 300-620 All Questions

View all questions & answers for the 300-620 exam
Go to Exam

Exam 300-620 topic 1 question 152 discussion

Actual exam question from Cisco's 300-620
Question #: 152
Topic #: 1
[All 300-620 Questions]

A network engineer must integrate VMware vCenter cluster with Cisco ACI. The requirement is for the management traffic of the hypervisors and VM controllers to use the virtual switch associated with the Cisco Application Policy. The EPG called "Vmware-MGMT" with VLAN 300 has been created for this purpose. Which set of steps must be taken to complete the configuration?

  • A. • Add VLAN 300 with static allocation to the VLAN POOL that is used for VMM integration.
    • Attach the VMM domain to the target EPG with resolution preprovision, mode static, untagged access VLAN, and Port-Encap 300.
  • B. • Associate the target EPG with the VMM domain with default settings.
    • Enable Infrastructure VLAN on AAEP used toward VMware hypervisors.
  • C. • Enable Infrastructure VLAN on AAEP used toward VMware hypervisors.
    • Associate the target EPG with the VMM domain with default settings.
  • D. • Enable Infrastructure VLAN on AAEP used toward VMware hypervisors.
    • Create a static binding in the target EPG toward VMware hypervisors with VLAN 300, untagged access VLAN, and Untagged 802.1P mode.
Show Suggested Answer Hide Answer
Suggested Answer: A 🗳️
by zelya19 at March 5, 2024, 5:12 a.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
zelya19
10 months, 1 week ago
Selected Answer: A
- Choose a VLAN to use for ESX management. - Add the VLAN chosen for ESX management to a range (or Encap Block) in the VLAN pool associated with the target VMM domain. The range where this VLAN is added must have allocation mode set to static allocation. - Create a management EPG in the ACI management tenant (mgmt). - Verify that the bridge domain associated with the management EPG is also associated with the private network (inb). - Associate the management EPG with the target VMM domain as follows: - Use resolution immediacy as pre-provision. - Specify the management VLAN in the Port Encap field of the VM domain profile association. https://www.cisco.com/c/en/us/td/docs/dcn/aci/apic/5x/virtualization-guide/cisco-aci-virtualization-guide-52x/ACI-Virtualization-Guide-52x-aci-with-vmware-vds.html#concept_275421741CB04DF88960D723E19C8863
upvoted 2 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel