Exam 300-101 topic 2 question 1 discussion

Actual exam question from Cisco's 300-101

Question #: 1
Topic #: 2

SIMULATION -
You are a network engineer with ROUTE.com, a small IT company. ROUTE.com has two connections to the Internet; one via a frame relay link and one via an
EoMPLS link. IT policy requires that all outbound HTTP traffic use the frame relay link when it is available. All other traffic may use either link. No static or default routing is allowed.
Choose and configure the appropriate path selection feature to accomplish this task. You may use the Test Workstation to generate HTTP traffic to validate your solution.

Show Suggested Answer

Suggested Answer: See explanation below
First you need to configure access list to HTTP traffic and then configure that access list. After that configure the route map and then apply it on the interface to the server in EIGRP network.

by james at May 18, 2019, 12:01 p.m.

Comments

Submit Cancel

CiscoDudeYEG

5 years, 6 months ago

On R1 The access list: access-list 101 permit tcp any any eq 80 The Route-Map: route-map pbr permit 10 match ip address 101 set ip next-hop 10.1.100.2 end wr Apply to interface facing the eigrp network: int fa0/1 ip policy route-map pbr end wr

upvoted 3 times

...

james

5 years, 6 months ago

Does this configuration also require some kind of reachability tracking as the question states it is to use the Frame Relay link 'when it is available'?

upvoted 1 times

...

Exam 300-101 All Questions

View all questions & answers for the 300-101 exam

Exam 300-101 topic 2 question 1 discussion

Comments

CiscoDudeYEG

james

SY0-701