Exam 350-801 topic 1 question 361 discussion

Actual exam question from Cisco's 350-801

Question #: 361
Topic #: 1

An engineer must enable onboarding of on-premises devices by using activation codes to a Cisco UCM server The engineer activated the Cisco Device Activation Service and set the default registration method to use the codes. Which action completes the configuration?

A. Generate 16-digit codes by using the Bulk Administration Tool.
B. Set the Enable Activation Code enterprise parameter to True.
C. Create a Bulk Administration Tool provisioning template.
D. Manually provision new phones that have an activation code requirement.

Show Suggested Answer

Suggested Answer: C 🗳️

by TheBabu at May 15, 2024, 3:52 a.m.

Comments

Submit Cancel

mcbesy

3 months, 3 weeks ago

Selected Answer: D

1.Activate the Device Activation Service 2.Set Registration Method to use Activation Codes 3.Add Phone with Activation Code Requirement Manually or 4.Add Phones with Activation Codes via Bulk Administration 5.Activate Phones

upvoted 1 times

...

G0y0

5 months, 2 weeks ago

Selected Answer: C

D. is incorrect. You must first to provision and to add the phone to the database to get the activation code. Also it is impractical to add many devices manually. Answer is C. Reference: System Configuration Guide for Cisco Unified Communications Manager, Release 12.5(1) CHAPTER 40: Device Onboarding via Activation Codes https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1/systemConfig/cucm_b_system-configuration-guide-1251.pdf

upvoted 1 times

...

anas_hafez

7 months, 1 week ago

Selected Answer: D

C is not correct since another 2 more steps which are Create CSV File with New Phones & Insert Phones are required to "complete" the configuration while Add Phone with Activation Code Requirement is sufficient on its own.

upvoted 2 times

G0y0

5 months, 2 weeks ago

D. is incorrect. It says that manually provision new phones THAT HAVE an activation code requirement, rather you must to configure and provision manually the phone to get the activation code. First is to provision the phone and then get the activation code created when you save the phone to the database.

upvoted 1 times

Russel72

3 months, 1 week ago

There are two ways to achieve this: 1. Add Phone with Activation Code Requirement 2. Add Phones with Activation Codes via Bulk Administration Option 1 is a manual process. Option 2 is preferable, however just creating a Template does not "Complete" the process. So, D cannot be correct.

upvoted 2 times

...

TheBabu

9 months ago

Selected Answer: C

C seems correct according to this doc: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1/systemConfig/cucm_b_system-configuration-guide-1251/cucm_b_system-configuration-guide-1251_chapter_01011100.html#task_1D98A6EBE82277D056446584CEF13597

upvoted 2 times

rick2

6 months, 2 weeks ago

C is correct: Provision phones with activation code requirement. Following are two provisioning example options: Add Phone with Activation Code Requirement Add Phones with Activation Codes via Bulk Administration

upvoted 1 times

...