Exam 300-610 topic 1 question 123 discussion

Actual exam question from Cisco's 300-610

Question #: 123
Topic #: 1

The end users report issues with datastore reachability between the newly installed virtual machines (VMs) and the storage array. The VMs are deployed on a Cisco C-Series server, directly connected with Cisco Nexus 5672UP switches over FCoE VLAN. The data traffic on VLAN 99, which is designated as a native VLAN, reaches its default gateway, but FCoE VLAN 99 fails to access the datastore. Which action resolves the problem?

A. Implement FCoE traffic on VLAN 10 and data traffic on VLAN 99.
B. Implement host-facing FCoE ports as spanning-tree port type edge.
C. Configure the FCoE VLAN in the VSAN database before including it in the trunk port.
D. Configure the FCoE VLAN traffic on a separate interface from any other VLANs that traverse the network.

Show Suggested Answer

Suggested Answer: A 🗳️

by Wasamela at June 26, 2024, 12:30 p.m.

Comments

Submit Cancel

harmann

2 weeks, 2 days ago

Selected Answer: A

A on this, since it specifically says VLAN 99 is set as the native vlan, that immediately disqualifies VLAN 99 from being used as the FCoE VLAN for this scenario. Since there is no option to remove VLAN 99 from being native, the next logical choice is to move the FCoE to a different VLAN that is not used as native VLAN.

upvoted 1 times

...

OLENDE

4 months, 3 weeks ago

Selected Answer: A

I think that FCoE is not supported on native vlan. So, the answere may be A https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/san_switching/configuration/guide/b-cisco-nexus-9000-nx-os-san-switching-configuration-guide-933/b-cisco-nexus-9000-nx-os-san-switching-configuration-guide-933_chapter_01111.pdf

upvoted 3 times

...

lurker8000

7 months ago

Agree with C on this

upvoted 1 times

...

Wasamela

12 months ago

Selected Answer: C

I think that FCoE VLAN 99 needs to be configured in the VSAN database for the switch to recognize the traffic as FCoE

upvoted 2 times

...