Exam 300-620 topic 1 question 281 discussion

Actual exam question from Cisco's 300-620

Question #: 281
Topic #: 1

An engineer configures SNMP for an ACI fabric and created an SNMP Monitoring Destination Group called snmp_dgroup1. Snmp_dgroup1 is configured with the server hostname and community password. An SNMP policy called snmp_podpolicy1 is configured to enable SNMP and add an SNMP Client Group Profile called snmp_clgroup1. Snmp_podpolicy1 is associated the default pod profile via a pod policy group named pod1. Which configuration set must the engineer enable to complete the SNMP configuration?

A. Configure the OOB management contract to permit UDP 162.
Associate snmp_dgroup1 with the OOB management EPG.
B. Configure an SNMP management contract to permit all traffic.
Associate snmp_podpolicy1 with an SNMP pod profile.
C. Configure an SNMP management contract to permit UDP 162.
Associate the SNMP Source to snmp_clgroup1.
D. Configure the OOB management contract to permit all traffic.
Associate snmp_clgroup1 with the SNMP management EPG.

Show Suggested Answer

Suggested Answer: A 🗳️

by crosillo30 at Sept. 17, 2024, 11:42 a.m.

Comments

Submit Cancel

samfab

4 months, 2 weeks ago

Selected Answer: A

destination group should be associated with the OOB management EPG.

upvoted 3 times

...

prospio971

6 months, 2 weeks ago

Selected Answer: A

Should be A: *Create an out-of-band (OOB) contract in the "mgmt" tenant: Navigate to Tenant > mgmt > Contracts Create a new contract (e.g., "OOB-SNMP-Contract") Add a filter to permit UDP ports 161 and 162 for SNMP traffic *Associate the OOB contract with the out-of-band EPG: Go to Tenant > mgmt > Node Management EPGs Select the out-of-band EPG Add the created contract under "Provided Contracts"

upvoted 3 times

...

crosillo30

9 months, 1 week ago

Should be letter A: https://community.cisco.com/t5/documentos-data-center/configuraci%C3%B3n-snmp-para-aci/ta-p/4680520 Step 1 - Management Contracts (Out-of-band and inband) If you already have OOB or Inband contracts defined within Tenant Mgmt, you will need to add the appropriate filters to your contracts for SNMP (UDP-161 and UDP-162). STEP 2 > Trap Destinations Management EPG: default (Out-of-Band)<<<<<<<<<<<< This Management EPG: default (Out-of-Band) has been configured separately and is a prerequisite for SNMP to work.

upvoted 2 times

...