exam questions

Exam 200-901 All Questions

View all questions & answers for the 200-901 exam

Exam 200-901 topic 1 question 209 discussion

Actual exam question from Cisco's 200-901
Question #: 209
Topic #: 1
[All 200-901 Questions]

Refer to the exhibit.

Which two statements describe the configuration of the switch after the Ansible script is run? (Choose two.)

  • A. Traffic from ports 0/2 to 0/5 is able to flow on port 0/1 due to the trunk.
  • B. GigabitEthernet0/1 is left unconfigured.
  • C. GigabitEthernet0/2 and GigabitEthernet0/3 are access ports for VLAN 6.
  • D. Traffic is able to flow between ports 0/2 to 0/5 due to the trunk on port 0/1.
  • E. Traffic on ports 0/2 and 0/3 is connected to port 0/6.
Show Suggested Answer Hide Answer
Suggested Answer: AC 🗳️

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
FireTv
Highly Voted 3 years, 4 months ago
No doubt about C. Assuming port 0/5 has native vlan (vlan 1), A is also correct. ( port 0/1 can pass vlan 1,6,7,8) D is not correct, you need a router on stick topology for that. A+C.
upvoted 17 times
...
Mormon
Highly Voted 3 years, 4 months ago
A & C are the right answers
upvoted 12 times
Johnconnor2021
2 years, 8 months ago
confirm A, C are correct.
upvoted 4 times
...
aprettyparrot
2 years, 6 months ago
A+C are correct. I saw this question somewhere else and there are two blocks missing from the question (which show why A is correct), one of which puts Gi0/5 on VLAN 8. The missing blocks are below: - ios_vlan: vlan_id: 7 name corporate-vlan interfaces: - GigabitEthernet0/4 - ios_vlan: vlan_id: 8 name: iot_vlan interfaces: - GigabitEthernet0/5
upvoted 16 times
richard2865
1 year, 11 months ago
Thanks for adding the other blocks.
upvoted 2 times
...
...
...
evilgoat
Most Recent 8 months, 2 weeks ago
B and E are obviously incorrect C is obviously correct that leaves: A. Traffic from ports 0/2 to 0/5 is able to flow on port 0/1 due to the trunk D. Traffic is able to flow between ports 0/2 to 0/5 due to the trunk on port 0/1 port 0/2 is in VLAN 6, port 0/5 is in VLAN 8 and port 0/1 is a trunk From my perspective both A and D infer that inter-vlan routing exists somewhere that is accessible via the trunk on port 0/1. If this is the case, we can assume that routing exists both ways, so not just from 0/2 to 0/5 but the reverse as well, which would make it D for me
upvoted 1 times
...
macxsz
1 year, 4 months ago
Selected Answer: AC
A and C But I think the image is incomplete
upvoted 1 times
...
noroot4u
2 years, 7 months ago
A & C are correct. The trunk link allows multiple VLANS to traverse it. The access ports define which VLAN is tagged by that port when a packet/frame enters the switchport.
upvoted 2 times
...
zgcorpuz
2 years, 8 months ago
A & C is the correct answer. Gi0/1 - trunk, can pass vlans(6,7,8) Gi0/2 & Gi0/3 - access, vlan 6 Gi0/4 - access, vlan 7 Gi0/5 - access, vlan8 B is wrong since Gi 0/1 is configured as trunk port D is wrong because traffic can not pass between Gi0/2 and Gi0/5 since they are on different vlans E Gi0/6 is not stated
upvoted 4 times
Drackos2
2 years, 8 months ago
I don’t see Gi0/5 on the Ansible snippet
upvoted 4 times
...
...
SAGA
2 years, 9 months ago
Why D is incorrect? A and D seems be same meaning.
upvoted 2 times
Johnconnor2021
2 years, 8 months ago
it says "between". Trunk allow that those VLAN traffic pass through it BUT a TRUNK DONT combine them. You need Inter-vlan to do that and there is no mention about inter vlan configuration besides, only a L3 device can do it like a Router or L3 switch, and a Switch 2960CX is only a L2 device, without L3 functionality.
upvoted 2 times
...
...
Love2Cod3
3 years ago
The image is missing the following after vlan 7 config: - ios_vlan: vlan_id: 8 name: iot-vlan interfaces: GigabitEthernet0/5 Anyway, A & C are the correct answers. B is not true since it was configured as a trunk port pruned with VLANs 6-8. D is not true. Segregation is what VLANs are for. E is obviously not true. There’s no port 0/6 in the script.
upvoted 2 times
...
Miguex125
3 years, 3 months ago
I thik is A and D are correct. C is not correct because the "access" command is missing in the configuration. https://docs.ansible.com/ansible/latest/modules/ios_l2_interfaces_module.html
upvoted 1 times
...
Leonhrz
3 years, 3 months ago
It's A and C. port 0/2 and 0/3 are part of VLAN 6 (switch port access vlan 6) port 0/4 is part of VLAN 7 ( switch port access vlan 7 ) (answer C) on port 0/1, we are tagging VLAN 6 - 8, hence traffic from port 0/2 - 0/4 can flow through port 01
upvoted 5 times
...
nityi
3 years, 4 months ago
C and D port 2 and 3 are access port. So that traffic should be available on the trunk port from outside. we cant discus with gig 5, its is not mentioned in the Ansible play
upvoted 1 times
nityi
3 years, 4 months ago
Sorry A and E..
upvoted 1 times
...
wilie
2 years, 11 months ago
You don't need Trunk port to access port that are in the same VLAN (D) suggest that the two access port will need the trunk to communicate making it a wrong choice
upvoted 1 times
wilie
2 years, 11 months ago
Correction A Suggest
upvoted 1 times
...
...
...
Requium
3 years, 5 months ago
I think A has sense, but D has more sense since is both way
upvoted 4 times
DenskyDen
2 years, 7 months ago
D. should be a wrong answer. The trunk port will carry the VLANS but it is still unknown whether there would be routing for different broadcast domains. A and C should be the correct answer.
upvoted 1 times
...
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago