Refer to the exhibit Router R1 and its peer R2 reside on the same subnet in the network. If an engineer implements this configuration to R1, how does it make connections to R2?
A.
R1 establishes TCP connections that are authenticated with a clear-text password.
B.
R1 establishes UDP connections that are authenticated with an MD5 password.
C.
R1 establishes UDP connections that are authenticated with a clear-text password.
D.
R1 establishes TCP connections that are authenticated with an MD5 password.
To enable message digest5 (MD5) authentication on a TCP connection between two BGP peers, use the neighbor password command in router configuration mode. To disable this function, use the no form of this command.
neighbor {ip-address | peer-group-name} password string
no neighbor {ip-address | peer-group-name} password
I agree, MD5 authentication is activated with the "password" command.
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/112188-configure-md5-bgp-00.html
It should be TCP connection with clear text password for IOS devices.
upvoted 1 times
...
This section is not available anymore. Please use the main Exam Page.350-501 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
pavned
Highly Voted 3 years, 3 months agoEdgardoAC
3 years, 1 month agothejag
Most Recent 10 months agoJjsa1994
3 years agoJondal
1 year agoAlphaFlex
3 years, 3 months ago