refer for B:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/hcs/12_5/HCS_Solution/Troubleshooting/chcs_b_troubleshooting-guide/chcs_m_troubleshooting-voice-application-components.html?dtid=osscdc000283
he correct answer is:
C. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.
Explanation: In Cisco Unified Communications Manager (CUCM), to capture detailed information related to Translation Patterns in SDL (Signaling Debug Log) traces, the administrator must enable the "Translation Patterns Analysis" option in the Micro Traces settings. This allows the system to display translation pattern operations in the SDL traces.
Digit Analysis Complexity: Required Field This parameter specifies the amount of digit analysis information that CCM trace file will provide. Cisco CallManager offers three digit analysis modes:
StandardAnalysis - Provides detail about the final matched pattern without the translation pattern and alternate matches detail.
TranslationAndAlternatePatternAnalysis - Provides detail about the translation pattern and the alternate matches in the call flow. This parameter displays details of only up to two Translation Patterns.
CompleteTranslationAndAlternatePatternAnalysis - Provides detail about all the translation patterns and the alternate matches in the call flow.
There is no "Detailed Call Analysis" under enterprise parameter.
But to see translation pattern in CAR you need to choose "TranslationAndAlternatePatternAnalysis" under service parameters.
Additionally, if you reference Service Parameter Configuration under the Cisco Call Manager (Active) service, within System, you'll find "Digit Analysis Complexity". You can toggle "StandardAnalysis", "TranslationAndAlternatePatternAnalysis", and "CompleteTranslationAndAlternatePatternAnalysis".
There is a bug CSCvb32314 in CUCM. Symptom:
Translation patterns are not present in cucm SDL traces even parameter "Digit Analysis Complexity" under Service parameters -> Call Manager -> Advanced is set to "TranslationAndAlernatePatternAnalysis". This is causing troubleshooting of HCS looping dial plan issues (or complex dialplan issues) difficult as translation patterns applied before reaching endpoint are not visible.
So it is B. I had the same bug in cucm 11.5 and investigated it deeply then found this bug
This section is not available anymore. Please use the main Exam Page.300-815 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
alert2003
Highly Voted 3 years, 8 months agojatoja83
Most Recent 2 months agodirkske78
9 months, 2 weeks agoFreddan
4 years, 1 month agoFreddan
4 years, 1 month agoALLENN
4 years, 1 month agoMert_kerna
2 years, 5 months agoAgshinA
3 years, 7 months agoFreddan
4 years, 1 month ago