Refer to the exhibit. P3 and PE4 are at the edge of the service provider core and serve as ABR routers. Aggregation areas are on either side of the core. Which statement about the architecture is true?
A.
To support seamless MPLS, the BGP route reflector feature must be disabled.
B.
If each area is running its own IGP, BGP must provide an end-to-end MPLS LSP.
C.
If each area is running its own IGP, the ABR routers must redistribute the IGP routing table into BGP.
D.
To support seamless MPLS, TDP must be used as the label protocol.
B is correct. The whole purpose of seamless MPLS or unified MPLS is to segment the network into multiple isolated IGPs and establish LSPs through the use of MP-BGP only between the loopback interfaces of the PE routers.
B - it is explained in this link
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/configuration_guide/mpls/b_1612_mpls_9600_cg/configuring_seamless_mpls.html
New Link
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/configuration_guide/mpls/b_1612_mpls_9600_cg/multiprotocol_label___switching__mpls_.html
New Link:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/configuration_guide/mpls/b_1612_mpls_9600_cg/configuring_seamless_mpls.html
upvoted 1 times
...
This section is not available anymore. Please use the main Exam Page.350-501 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
ric859
6 months, 3 weeks agothejag
2 years, 4 months agotkeitt
3 years, 9 months agonolbi
4 years, 3 months ago