B is the right answer, this was a tricky one... I quickly realized that both partner and local routers cannot be in the same passive mode for a link to form. The question is asking "what mode are YOU on". Well since you are able to see your partner information you would be in "active mode". Weather you partner is on "active" or "passive" doesn't matter, as long as you are active you can pull neighbors information.
ChatGPT-4 answered this question incorrectly (option C) until I pointed out that the ET1/0 and ET1/1 interfaces did not belong to SW1. It then used the correct logic to select option B.
In configuring Dynamic EtherChannel, with PAgP, at least one of the two sides must use desirable, and with LACP, at least one of the two sides must use active. The question is showing the other device with SP code...means, its LACP is PASSIVE. Therefore, opposite device's LACP configuration must be ACTIVE.
They key to this question is the line that reads "Partner's Information:" from there you know that you need to interpret the flags for the operational modes from the lens of "If my neighbor's port channel is configured this way, how do I need to configure mine so that I can actively form a LAG."
B is 100% correct.
In short, SW1 will always reflect its neighbor's status (how it is configured ). It is displaying SP(which means SW is Passive) for LACP communication to happen, one must be active, so this means SW1 has been configured as Active.
the answer is C because the question asks for the configuration mode and not how SW1 should be configured to be in etherchannel. the question is quite obvious.
This section is not available anymore. Please use the main Exam Page.200-301 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
DatBroNZ
Highly Voted 3 years, 1 month agoZUMY
Highly Voted 3 years, 6 months agoGiuseppe_001
3 years, 5 months agojehangt3
3 years, 5 months agoGiuseppe_001
3 years, 5 months agojehangt3
3 years, 5 months agoMinSun600
Most Recent 3 months ago[Removed]
6 months, 3 weeks ago6dcf910
10 months, 2 weeks agolinuxlife
1 year, 7 months agoJamPauGalBag
2 years, 2 months agoSan_Man
6 months, 2 weeks agoRoVasq3
2 years, 2 months agovuhidus
2 years, 3 months agohp2wx
2 years, 3 months agoTest90
2 years, 4 months agofrance60
2 years, 5 months agoDixieNormus
2 years, 2 months agoguille_teleco
2 years, 6 months agoScvrfvce
2 years, 6 months agoHalop
2 years, 6 months agoJSDH
2 years, 8 months agoqasawq
2 years, 9 months ago