Exam 300-710 topic 1 question 86 discussion

C is the correct answer 100%. Firepower Management Center Enter this command on the Firepower Management Center in order to generate a troubleshoot file: admin@FMC:~$ sudo sf_troubleshoot.pl Starting /usr/local/sf/bin/sf_troubleshoot.pl... Please, be patient. This may take several minutes. Troubleshoot information successfully created at /var/common/xxxxxx.tar.gz Firepower Devices Enter this command on FirePOWER devices/modules and virtual managed devices in order to generate a troubleshoot file: > system generate-troubleshoot all Starting /usr/local/sf/bin/sf_troubleshoot.pl... Please, be patient. This may take several minutes. The troubleshoot option code specified is ALL. Troubleshoot information successfully created at /var/common/xxxxxx.tar.gz https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote-SourceFire-00.html

C for FTD. B for FMC. Ans. "C"

Correct answer is: C

B and C both seem to be right. I ran B on an FTD from expert mode and ran C from the FMC CLI and they both produce the same output. I'm sure C is preferable though since you don't have to go into expert mode.

https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote-SourceFire-00.html#anc12

The answer is C. system generate-troubleshoot all Answer B: sudo sf_troubleshoot.pl is running on FMC

B is the correct answer. If go as expert user on CLI on FTD then you can run this command. th e C option it can be run on normal console of FTD.

C for FTD. B for FMC. Ans. "C"

Agree, C for sure

100% C is correct!

Correct answer is C (Tip: this is for FTD and not FMC) https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote-SourceFire-00.html#anc12