exam questions

Exam 200-301 All Questions

View all questions & answers for the 200-301 exam

Exam 200-301 topic 1 question 249 discussion

Actual exam question from Cisco's 200-301
Question #: 249
Topic #: 1
[All 200-301 Questions]


Refer to the exhibit. An engineer must configure GigabitEthernet1/1 to accommodate voice and data traffic. Which configuration accomplishes this task?

  • A. interface gigabitethernet1/1 switchport mode access switchport access vlan 300 switchport voice vlan 400
  • B. interface gigabitethernet1/1 switchport mode trunk switchport trunk vlan 300 switchport trunk vlan 400
  • C. interface gigabitethernet1/1 switchport mode access switchport voice vlan 300 switchport access vlan 400
  • D. interface gigabitethernet1/1 switchport mode trunk switchport trunk vlan 300 switchport voice vlan 400
Show Suggested Answer Hide Answer
Suggested Answer: A 🗳️

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
siri_8932
8 months, 1 week ago
The answer is 'A'. For some people, this might be confusing since the port has to be enabled as trunk port to carry different types of data/two vlans. but Voice VLAN config is an exception, although we might need to config it as trunk, we are doing it as an access port only. the access port itself acts as trunk port This is an exception.
upvoted 3 times
...
bymrdas
1 year, 1 month ago
Selected Answer: A
Correct
upvoted 3 times
...
eb63e5a
1 year, 1 month ago
A is correct VoIP concept
upvoted 1 times
...
[Removed]
1 year, 2 months ago
Selected Answer: A
A is correct trunk has nothing to do in this question
upvoted 2 times
...
[Removed]
1 year, 7 months ago
Selected Answer: A
The correct answer is A because there is nothing about trunks in the question being asked. gg good day Go Dodgers
upvoted 2 times
...
ZUMY
2 years, 10 months ago
A is correct
upvoted 3 times
...
SOAPGUY
3 years ago
Selected Answer: A
PAGE198, VOL1; Example 8-8 Configuring the Voice and Data VLAN on Ports Connected to Phones
upvoted 3 times
...
LilGhost_404
3 years, 3 months ago
Selected Answer: A
https://study-ccna.com/configuring-voice-vlans/
upvoted 2 times
...
Ravan
3 years, 3 months ago
A is correct
upvoted 1 times
...
johnnd
3 years, 3 months ago
A indeed
upvoted 1 times
...
AndersonMr
3 years, 3 months ago
Selected Answer: A
Voice VLANs work like this.
upvoted 2 times
...
yonten007
3 years, 4 months ago
Selected Answer: D
D: You need to enable protected management frame under the SSID configured
upvoted 1 times
...
Anarckii
3 years, 5 months ago
Selected Answer: A
For some this may be confusing and it go be the first time around untill i looked at the answer more clearly. The answer is A, because lets say you wanted to configure the port as a management port, you would want to configure that interface first before the voice vlan. Thats the only I remember from working with switching as an administrator
upvoted 1 times
...
vannplus11
3 years, 8 months ago
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_40_se/configuration/guide/scg/swvoip.pdf
upvoted 1 times
...
etx
3 years, 10 months ago
How can this be correct? Access ports can only process one vlan per port.
upvoted 3 times
sdokmak
3 years, 10 months ago
VoIP phones work in a weird way. The access port is split into two ports, one for voice and one for data. So somehow the access access port behaves like a trunk.
upvoted 13 times
...
...
Bne_Pradhan
3 years, 11 months ago
Guys, how can a access port manage to process two different Vlans over the same interface, not convinced with the ans.
upvoted 2 times
Sten111
3 years, 10 months ago
It is a trunk but not configured as a trunk. Voice VLANS are weird. https://networklessons.com/cisco/ccna-routing-switching-icnd1-100-105/voice-vlan
upvoted 5 times
[Removed]
3 years, 9 months ago
Some very good discussions covering answer D which illustrate this command line being invalid: https://community.cisco.com/t5/switching/what-happens-when-voice-vlan-command-is-added-to-a-trunk-port/td-p/1570579 https://learningnetwork.cisco.com/s/question/0D53i00000Kt1GR/voice-vlan-on-a-trunk-port
upvoted 2 times
...
[Removed]
3 years, 9 months ago
While A seems to be incorrect syntax and an invalid command line, of the choices listed A is the best answer. https://www.learncisco.net/courses/icomm-ccna-voice/cisco-uc-solution-maintenance/switch-configuration.html#:~:text=Cisco%20allows%20us%20to%20have%20two%20VLANs%20connected%20to%20one%20port%2C%20it%27s%20a%20multi-VLAN%20access%20port.%20And%20Cisco%20allows%20us%20to%20bend%20the%20rules%20if%20and%20only%20if%20one%20of%20those%20two%20VLANs%20is%20a%20voice%20VLAN https://community.cisco.com/t5/switching/subinterface-to-access-port/td-p/3804800 https://www.reddit.com/r/networking/comments/m5ruhr/8021x_and_allowing_phones_on_voice_vlan/ https://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/113260-voice-vlan-00.html#:~:text=Configure%20specified%20VLANs%20for%20voice%20and%20data%20traffic https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_40_se/configuration/guide/scg/swvoip.pdf
upvoted 2 times
xtraMiles
9 months, 3 weeks ago
There are a couple of extra step you have to do to make answer D work and it's not given in the choices so I stayed away from it. i.e. on G1/1 sw tr en dot sw mod tr sw tr al nat vl { 0-4094} sw voice vl 400
upvoted 1 times
...
...
...
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago