Exam 300-415 topic 1 question 70 discussion

D is Correct #show omp tlocs | tab will get the color information because is in a table format

Made a mistake on this: font was so large the screen wrapped and wasn't displsaying the color and tloc details. I thought something was off.. I'd agree show omp tlocs is the correct answer for this one....D

If you run show omp tlocs like shown in the example it doesn't show the color. Show OMP route does although that's not the command without the S but works. I couldn't add a screen shot of show omp tlocs output but it's shown in example below and you can see there's no color label.

There is no correct answer actually: sdwn01# show omp tlocs detail (this is showing you learned colors) --------------------------------------------------- tloc entries for 1.1.1.2 biz-internet ipsec --------------------------------------------------- RECEIVED FROM: peer 0.0.0.0 uslav-colo-1fdc-sdwn01# show omp tlocs (not showing you colors) PUBLIC PRIVATE PSEUDO PUBLIC PRIVATE PUBLIC IPV6 PRIVATE IPV6 BFD FROM PEER STATUS KEY PUBLIC IP PORT PRIVATE IP PORT IPV6 PORT IPV6 PORT STATUS -------------------------------------------------------------------------------------------------------------------------------- 0.0.0.0 C,Red,R 1 1.1.1.1 12387 1.1.1.1 12387 :: 0 :: 0 up

B is incorrect for this answer because the actual command is show omp routes not show omp route. therefore D should be the correct answer as it is the full command. this can be looked up on this page. https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/operational-cmd.html#r_show_omp_tlocs_1923.xml

on this one im gonna go with d

The answer is D: vEdge1# show omp tlocs --------------------------------------------------- tloc entries for 10.4.0.1 mpls ipsec --------------------------------------------------- RECEIVED FROM: peer 10.100.0.12 status C,I,R loss-reason not set lost-to-peer not set lost-to-path-id not set Attributes: attribute-type installed encap-key not set encap-proto 0 encap-spi 256 encap-auth sha1-hmac,ah-sha1-hmac encap-encrypt aes256 public-ip 172.31.14.2 public-port 12346 private-ip 172.31.14.2 private-port 12346

B should be the correct one , as it displays tloc and color information

correct..