Exam 300-625 topic 1 question 58 discussion

Actual exam question from Cisco's 300-625

Question #: 58
Topic #: 1

A storage administrator manually configures a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID. What is the reason why the configuration is not working?

A. Static domain IDs apply only after a switch is rebooted.
B. The disruptive keyword was not used on the command.
C. Build fabric notifications were not sent to the other switches.
D. Domain manager fast restart is not enabled on the switch.

Show Suggested Answer

Suggested Answer: A 🗳️

by LordAndy at July 16, 2021, 4:09 a.m.

Comments

Submit Cancel

Drunken_Commie

3 years, 2 months ago

It is B. When you change Domain ID of a switch, you _have to_ send RCF frames to the fabric (which is fcdomain restart disruptive command).

upvoted 1 times

...

tarun3081

3 years, 3 months ago

it is definitely not A . i tested it without reboot switch.

upvoted 1 times

...

kdawg21

3 years, 6 months ago

B isn't correct, see https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/system_management/nx-os/sysmgmt_cli_6-x/domn.html

upvoted 3 times

cryptonite

3 years, 2 months ago

current image is 8.x or 9.x, 6.x is a bit dated.

upvoted 1 times

...

LordAndy

4 years ago

option B

upvoted 2 times

...