Exam 300-425 topic 1 question 100 discussion

Perform rping on both controllers to check if the peer is reachable. https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-8/config-guide/b_cg88/high_availability.html

right command is rping , so A is correct

Answer is A like other comments

Explanation: rping - Check IPsec status on both controllers to check which link is broken RP or RMI. Perform rping on both controllers to check if the peer is reachable. mping - Mobility ping over UDP—Thistest runs over mobility UDPport 16666. It tests whether the mobility control packet can be reached over the management interface. eping - Mobility ping over EoIP—This test runs over EoIP (IP protocol 97). It tests the mobility data traffic over the management interface Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_010010010.pdf https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-8/config-guide/b_cg88/high_availability.html

"Perform rping on both controllers to check if the peer is reachable." From the referenced Cisco docs

Answer: B

I mean A

The rping utility was added in WLC 8.0 code, which is helpful for verifying redundancy link status. B

wrong. the answer is rping https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/HA_SSO_DG/High_Availability_DG.html