B. AP Join Profile
Cisco Hyperlocation is enabled under the AP Join Profile in the Configuration > Tags & Profiles > AP Join section of the web interface. This is where you configure settings such as enabling Hyperlocation, setting the detection threshold, trigger threshold, and reset threshold.
Configure Hyperlocation on the Cisco WLC (Cisco IOS XE)
To configure the Cisco Catalyst 9800 WLC for Hyperlocation, take the following steps:
Log in to the Cisco Catalyst 9800 WLC.
Navigate to Configuration > Tags & Profiles > AP Join.
At this point, either modify an existing profile or create a new one, if necessary.
In the Edit AP Join Profile page, choose AP and then Hyperlocation.
Check the Enable Hyperlocation check box.
Save or update the profile:
If this profile is new, click Save & Apply to Device.
If you are modifying an existing profile, click Update and Apply to Device.
Save the configuration.
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco-hyperlocation.html#task_k2c_nps_xfb
prohttps://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/wireless/controller/9800/16-11/config-guide/b_wl_16_11_cg/cisco-hyperlocation.html.xml
vided answer is correct
upvoted 4 times
...
This section is not available anymore. Please use the main Exam Page.300-430 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
rrahim
2 months, 1 week agoVlad_Is_Love_ua
5 months, 3 weeks agoVlad_Is_Love_ua
6 months agoalexblue
1 year, 4 months agokthekillerc
1 year, 11 months ago