Exam 300-425 topic 1 question 20 discussion

B is the correct answer, for current operating channel we should put AP in local mode and then connect to CleanAir

Answer is B: Local Mode

Answer is B: "In Local Mode, each Cisco CleanAir-enabled access point radio provides air quality and interference detection reports for the current operating channel only." "In Monitor Mode, the access point provides air quality and interference detection reports for all monitored channels." "SE-Connect Mode enables a user to connect Chanalyzer directly to a Cisco CleanAir access point when the access point is not connected to a controller. The access point provides air quality and interference detection reports for all monitored channels." https://support.metageek.com/hc/en-us/articles/200591105-Connecting-Chanalyzer-to-a-Cisco-CleanAir-Access-Point

The answer is definitely Local Mode In Local Mode, each Cisco CleanAir-enabled access point radio provides air quality and interference detection reports for the current operating channel only. Local mode does not disrupt client connections. When a hybrid-REAP access point is connected to the controller, its Cisco CleanAir functionality is identical to local mode.

Chanalyzer has the advantage of being able to capture from a specialized USB card but can also connect to a Cisco AP running CleanAir and capture raw data detected by the AP Spectrum Analysis Engine (SAgE). To enable such a mode, you can keep your AP in a normal (Local) mode, but you will then only be able to see that AP channel. If you want the AP to sweep the entire band, you need to set your AP to SE-Connect https://ebookreading.net/view/book/EB9780136600992_19.html

Local Mode. "To enable such a mode, you can keep your AP in a normal (Local) mode, but you will then only be able to see that AP channel. If you want the AP to sweep the entire band, you need to set your AP to SE-Connect" Chapter 3 page 49-50

Local Mode Each Cisco CleanAir-enabled access point radio provides air quality and interference detection reports for the current operating channel only. Local mode does not disrupt client connections. --> Answer B

Provided answer is correct. https://www.metageek.com/training/lessons/chanalyzer-clean-air.html "only on the current operating channel is local mode. Please don't argue answers unless you know. Validate not guess please.

"only on the current operating channel", so that would be B, SE-Connect is for a full scan on a non-wlc connected AP. So its not D

D - https://www.metageek.com/training/lessons/chanalyzer-clean-air.html "SE-Connect Mode SE-Connect Mode enables a user to connect Chanalyzer directly to a Cisco CleanAir access point when the access point is not connected to a controller. The access point provides air quality and interference detection reports for all monitored channels."

Should be D