A.- When there is a protocol mismatch the status is UP/DOWN
B.- When there is a duplex mismatch, the status is UP/UP
C.- When the interface is shut down the status is ADMINISTRATIVELY DOWN/DOWN
The only 2 answers where the status is DOWN/DOWN are answers C & D
A. There is a protocol mismatch up/down
B. There is a duplex mismatch up/up
C. The interface is shut down admin down / down
D. The interface is error-disabled down/down
E. There is a speed mismatch down/down
Yea I've seen a lot of people bring up the claim and a cisco source claiming it will only impact the performance but mismatched protocol will result in status: down Protocol: down in packet tracer.
D & E are correct
protocol mismatch the status : UP/DOWN
duplex mismatch, the status : UP/UP
shut down the status : ADMINISTRATIVELY DOWN/DOWN
speed mismatch = error-disable : DOWN/DOWN
line status/protocol status:
down/down
- No cable connected, bad cable
- neighbor device is powered off
- neighbor device is shutdown
- neighbor device is error disabled
add-on (speed mismatch):
line status/protocol status:
down/down
- No cable connected, bad cable, speed mismatch
- neighbor device is powered off
- neighbor device is shutdown
- neighbor device is error disabled
correct answers are B &D
A. There is a protocol mismatch up/down
B There is a duplex mismatch down/down
Switch(config-if)#duplex full
Switch(config-if)#
%LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
C. err-disable down/down
The Down/Down combination can have two interface status:
- notconnect (no cable, bad cable, neighbor device is shutdown, speed mismatch)
- err-disabled (port security has disabled the interface)
Correct answers are D and E
The interface will be in a down (line Status) - down (protocol status) state (not connect interface) for cases of: No cable, bad cable, wrong cable pinouts, speed mismatch and neighbouring device is (1) powered off (2)shutdown or (3) err-disabled. The interface will also be in down-down(err-disabled) because of port securirty disabling the interface
Speed mismatch and error disabled are the correct answers
upvoted 2 times
...
This section is not available anymore. Please use the main Exam Page.200-301 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
Dante_Dan
Highly Voted 2 years, 10 months agoYetiPatty
1 year, 4 months agojossyda
Highly Voted 2 years, 5 months agoWowA
2 years, 3 months agoRougePotatoe
2 years ago[Removed]
Most Recent 7 months, 3 weeks agolinuxlife
1 year, 7 months agolinuxlife
1 year, 7 months agoDB_Cooper
1 year, 9 months agoAmonzon
2 years, 3 months agoZUMY
2 years, 4 months agotimskis2
2 years, 5 months agoScorpionNet
2 years, 6 months agoDatBroNZ
2 years, 7 months agoismatdmour
2 years, 8 months agoAndersonMr
2 years, 9 months agoawashenko
2 years, 10 months agoMrBadger
2 years, 7 months agoawashenko
2 years, 10 months ago