An engineer must configure a Cisco ISR 4000 as an MGCP gateway to download its MGCP-specific configuration from Cisco UCM. Which Cisco IOS configuration snippet accomplishes this task?
A.
ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1 ISR4K(config)# mgcp call-agent 10.1.2.3 2428 service-type mgcp version 0.1 ISR4K(config)# ccm-manager config server 10.1.2.3 ISR4K(config)# ccm-manager config ISR4K(config)# ccm-manager mgcp ISR4K(config)# mgcp
B.
ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1 ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp version 0.1 ISR4K(config)# ccm-manager config server 10.1.2.3 ISR4K(config)# ccm-manager config download ISR4K(config)# ccm-manager mgcp ISR4K(config)# mgcp
C.
ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1 ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp version 11.5.1 ISR4K(config)# ccm-manager config server 10.1.2.3 ISR4K(config)# ccm-manager config ISR4K(config)# ccm-manager mgcp ISR4K(config)# mgcp
D.
ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1 ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp version 0.1 ISR4K(config)# ccm-manager config server 10.1.2.3 ISR4K(config)# ccm-manager config ISR4K(config)# ccm-manager mgcp ISR4K(config)# mgcp
A is wrong because in " mgcp call-agent 10.1.2.3 2428" the port should be 2427
B is wrong because in "ccm-manager config download " there is no download keyword
C is wrong because in "mgcp call-agent 10.1.2.3 2427 service-type mgcp version 11.5.1 " , the version should be 0.1
D is the correct answer, as all commands are correct.
https://telephonynetworking.fandom.com/wiki/CUCM_set_up_MGCP_Gateway
unfortunately its a typo but the instructions state to download the config. Nice tutorial on how to setup the gateway and at the end the command is
Gateway side
use the command show CCM-manager host
use the command show ccm-manager config-download
use the command show mgcp endpoints
Anything other than download is wrong.
D is correct, Refer the cisco document.
https://www.cisco.com/c/en/us/support/docs/voice/media-gateway-control-protocol-mgcp/214635-configure-and-troubleshoot-mgcp-gateways.html
It is D. A is wrong because of the port. B is wrong bc ccm-manager config "download" isn't a valid command. C is wrong bc version is the protocol version not CUCM version.
I think it is only typo error
show ccm-manager config-download -> shows the auto-configuration download status
upvoted 1 times
...
...
This section is not available anymore. Please use the main Exam Page.350-801 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
ciscogeek
Highly Voted 3 years agofrankieasantiago
Most Recent 11 months, 2 weeks agoBrant
9 months, 3 weeks agoALLENNN
2 years agodriz
1 year, 12 months agoMeowthL
2 years, 1 month agoOmitted
3 years agoALLENNN
2 years ago