ExamTopics Logo
Mail Us[email protected]
Menu
Cisco Discussions
exam questions

Exam 300-415 All Questions

View all questions & answers for the 300-415 exam
Go to Exam

Exam 300-415 topic 1 question 149 discussion

Actual exam question from Cisco's 300-415
Question #: 149
Topic #: 1
[All 300-415 Questions]

An engineer is configuring a shaping rate of 1 Mbps on the WAN link of a WAN Edge router. Which configuration accomplishes this task?
A.

B.

C.

D.

Show Suggested Answer Hide Answer
Suggested Answer: C
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/config-cmd.html#wp4217152133
by ChrisCCNA at Sept. 4, 2022, 8:25 p.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
Nalla123
Highly Voted 2 years, 9 months ago
Answer is D vpn vpn-id interface interface-name shaping-rate kbps
upvoted 16 times
...
Arsenal16
Most Recent 4 months, 3 weeks ago
Answer is D based on https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/config-cmd.html#r_shaping_rate_3056.xml the answer should be vpn vpn-id interface interface-name shaping-rate kbps
upvoted 1 times
...
mikidvd51
7 months, 1 week ago
why cisco uses on some commands bps , on some Bps, and on some kbps This is a MESS.
upvoted 2 times
...
Rosh8787
8 months, 1 week ago
Option D is the correct answer. Below is the correct format for defining shaping rate. vpn vpn-id interface interface-name shaping-rate kbps
upvoted 1 times
...
Rosh8787
8 months, 1 week ago
Option D is the correct answer https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-cr-book/config-cmd.html#r_shaping_rate_3056.xml
upvoted 1 times
...
Vic_Malloy
10 months, 1 week ago
C: is correct. To set the shape rate to 1Mbps you need t9 specify 1,000,000 b8ts per second.
upvoted 1 times
...
sull3y
1 year ago
Answer is D Command Hierarchy vpn vpn-id interface interface-name shaping-rate kbps
upvoted 2 times
...
bullett00th
1 year, 7 months ago
I would choose D!! shaping-rates are in Kpbs???!!
upvoted 1 times
...
NetArch_Teck
1 year, 11 months ago
The rate in which data is transmitted is in Kbps, meaning 1000 Kbps = 1MB The Syntax Hierarchy is VPN-"VPN-ID" Interface Interface Name Shaping-rate kbps The only correct option that fulfils the question is option D.
upvoted 1 times
...
BGP65000
2 years ago
I agree should be C, because shaping-rate is expressed in kbits, 1mbits=1000kbits.
upvoted 1 times
...
kcobain87
2 years, 7 months ago
It should be D
upvoted 3 times
...
ChrisCCNA
2 years, 9 months ago
This should be kbps
upvoted 4 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel