Exam 200-301 All Questions

View all questions & answers for the 200-301 exam

Exam 200-301 topic 1 question 132 discussion

Actual exam question from Cisco's 200-301

Question #: 132
Topic #: 1

DRAG DROP -

Refer to the exhibit. The IP address configurations must be completed on the DC-1 and HQ-1 routers based on these requirements:
✑ DC-1 Gi1/0 must be the last usable address on a /30
✑ DC-1 Gi1/1 must be the first usable address on a /29
✑ DC-1 Gi1/2 must be the last usable address on a /28
✑ HQ-1 Gi1/3 must be the last usable address on a /29
Drag and drop the commands from the left onto the destination interfaces on the right. Not all commands are used.
Select and Place:

Show Suggested Answer

Suggested Answer:

by [deleted] at Sept. 26, 2022, 3:32 p.m.

Comments

Submit Cancel

Customexit

Highly Voted 2 years, 8 months ago

Broadcast: odd Network: even 1st usable: odd last usable: even

upvoted 72 times

jamesgavin

2 years, 2 months ago

This is the best answer here. This way you can resolve the question very fast without doing all the math, and save time.

upvoted 9 times

...

HippoMonarch

1 year, 9 months ago

Really appreciate!!! It's really a magic method.

upvoted 6 times

...

NICE_ANSWERS

2 years ago

Please, what's the significance of this coded info

upvoted 2 times

elixirwell

1 year, 1 month ago

Check whether the last digit in the IP address is odd or even

upvoted 1 times

...

FiranmitMegersa

Most Recent 1 year ago

Given answer is correc

upvoted 3 times

...

C0tt0nking

1 year, 1 month ago

Gi1/1 & Gi1/3 are on the same subnet 255.255.255.248

upvoted 1 times

mlody85

5 months, 3 weeks ago

But on different devices :)

upvoted 1 times

...

nemostis

1 year, 1 month ago

Answer given is correct. Just take time and do it on paper

upvoted 2 times

...

[Removed]

1 year, 3 months ago

given answers are correct

upvoted 4 times

...

AbdullahMohammad251

1 year, 7 months ago

/28 SM should 255.255.255.240 Last usable address of the network 192.168.3.0/28 is 192.168.3.14 (192.168.3.0-192.168.3.15) /29 SM should be 255.255.255.248 The first usable address of the network 192.168.4.8/29 is 192.168.4.9(192.168.4.8-192.168.4.15) The last usable address of the network 192.168.3.8/29 is 192.168.3.14(192.168.3.8-192.168.3.15) /30 SM should be 255.255.255.252 The last octet of the network ID should be a multiple of 4 since every sub-network will have 4 IPs Network with network ID 209.165.202.128 (209.165.202.128-209.265.202.131) Last usable address 209.165.202.131

upvoted 2 times

16BitRun

1 year, 6 months ago

Correction: For Network with network ID 209.165.202.128 (209.165.202.128-209.265.202.131) The Last usable address should be 209.165.202.130.

upvoted 4 times

16BitRun

1 year, 6 months ago

209.165.202.131 is the Broadcast address.

upvoted 3 times

...

AbdullahMohammad251

1 year, 6 months ago

Yes, you're right, thank you!

upvoted 1 times

...

picho707

1 year, 10 months ago

I think the question should have read => HQ-1 Gi1/1 must be the last usable address on a /29 instead of HQ-1 Gi1/3. There are options from the selections to make the two switches non-overlapping.

upvoted 1 times

picho707

1 year, 10 months ago

I meant to say: I think the question should have read => HQ-1 Gi1/1 must be the last usable address on a /29 instead of HQ-1 Gi1/3. There are "NO" options from the selections to make the two switches non-overlapping.

upvoted 1 times

...

MelbourneJin

1 year, 12 months ago

G1/2 and G1/3 have the same IP address. Is that okay???

upvoted 2 times

7d040c6

10 months, 3 weeks ago

Yes, as they are internal to each LAN, connected by routers. NAT is required for these hosts to connect.

upvoted 1 times

...

Request7108

2 years, 6 months ago

If this question appears on the exam, I will likely skip it because of the time required to do the math. If possible, I would save it to the end to attempt only if I have extra time.

upvoted 3 times

UnbornD9

2 years, 2 months ago

It's something I'm trying to understand: you CAN skip it and review it in a second time? Someone know the answer?

upvoted 1 times

beerbisceps1

2 years, 2 months ago

I think once you skip and click next you can't go back

upvoted 4 times

...

16BitRun

1 year, 6 months ago

I know someone who recently took the CCNA Exam and told me you can't go back to a previous question or flag it for review later unlike CompTIA Exams.

upvoted 1 times

...

GigaGremlin

2 years, 8 months ago

Sorry, for the confusion,... just figured out, that I had a little miscalculation with the /30 .252 Network Address is 209.165.202.128 so 130 will be fine. But I guess that's intended to be...

upvoted 1 times

...

GigaGremlin

2 years, 8 months ago

IMHO someone should correct the 1st Questinon from "DC-1 Gi1/0 must be the last usable address on a /30" to this Q & A "DC-1 Gi1/0 must be the first usable address on a /30" then you can choose IP-Address 209.165.202.131 255.255.255.252, otherwise it simply doesn't make sense to me...

upvoted 2 times

...

F103

2 years, 8 months ago

Key word is "last usable address/ first usable addrss", check all possible subnet addresses then find if that is the last or first.

upvoted 1 times

...

[Removed]

2 years, 8 months ago

can someone help to explain how the answers were get? I'm confused.

upvoted 1 times

netzwork

2 years, 8 months ago

/30 means the subnet will be .252 hosts will go in groups of 4 /29 means subnet will be .248 hosts will go in groups of 8 /28 means subnet will be .240 hosts will go in groups of 16 Now if you need to see how to get first host, last host and broadcast addresses, I recommend you study that separately. To practice those exercises, go here: https://www.subnetting.net/Subnetting.aspx?mode=practice

upvoted 4 times

...