Exam 300-430 topic 1 question 165 discussion

D. Do not set any master APs. In a FlexConnect group, when you do not set any master APs, the controller dynamically selects one AP as the master AP based on the lowest MAC address for each model in the group. This ensures that each model with the lowest MAC address gets its upgrade directly from the controller. So, the correct action is to not set any master APs (Option D) for the FlexConnect group.

D. seems to do exactly what the question wants. By default the AP for each model with the lowest mac with do the download. No need to set it manually.

It specifically says that it wants the default of the lowest MAC, so you do not set a Master as this would over-ride the default. Answer is D.

Answer is D A FlexConnect group can have one primary AP per AP model. If a primary AP is not selected manually, the AP that has the least MAC address value is automatically chosen as the primary AP for that model. https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-6/config-guide/b_cg86/configuring_flexconnect_ap_upgrades_for_flexconnect_aps.html#:~:text=A%20FlexConnect%20group%20can%20have%20one%20primary%20AP%20per%20AP%20model.%20If%20a%20primary%20AP%20is%20not%20selected%20manually%2C%20the%20AP%20that%20has%20the%20least%20MAC%20address%20value%20is%20automatically%20chosen%20as%20the%20primary%20AP%20for%20that%20model.

agree with Yod_Jjot C is correct according to question One AP of each model with the lowest MAC address in the group must receive the upgrade. here is not mentioned that there is any specific configuration. we have to assume configuration for group is default . If a primary AP is not selected manually, the AP that has the least MAC address value is automatically chosen as the primary AP for that model. By allocating the master APs to different groups we will accomplish the request.

C is the correct answer. Ref: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-6/config-guide/b_cg86/configuring_flexconnect_ap_upgrades_for_flexconnect_aps.pdf See the "Configuring FlexConnect AP Upgrades (GUI)" section. Step 6 From the AP Name drop-down list, click Add Master to add the primary access point. You can manually assign primary access points in the FlexConnect group by selecting the access points.

Should be D as the default AP the image will be downloaded to is the one with the lowest MAC