exam questions

Exam 300-730 All Questions

View all questions & answers for the 300-730 exam

Exam 300-730 topic 1 question 31 discussion

Actual exam question from Cisco's 300-730
Question #: 31
Topic #: 1
[All 300-730 Questions]

In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?

  • A. Verify the spoke configuration to check if the NHRP redirect is enabled.
  • B. Verify that the spoke receives redirect messages and sends resolution requests.
  • C. Verify the hub configuration to check if the NHRP shortcut is enabled.
  • D. Verify that the tunnel interface is contained within a VRF.
Show Suggested Answer Hide Answer
Suggested Answer: B 🗳️
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec-conn-dmvpn-15-mt-book/sec-conn-dmvpn-summ- maps.pdf

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
netizen937
7 months, 2 weeks ago
Selected Answer: B
Saw this on the exam. I chose B.
upvoted 1 times
...
Net4dd
10 months, 1 week ago
Selected Answer: B
On receiving the redirect, Spoke1 initiates a resolution request for Host2 over the point-to-point tunnel interface (the same interface over which it received the redirect). The resolution request traverses the routed path (Spoke1-hub-spoke2). On receiving the resolution request, Spoke2 determines that it is the exit point and needs to respond to the resolution request. https://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/15-2mt/sec-flex-spoke.html
upvoted 1 times
Net4dd
10 months ago
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/15-mt/sec-flex-vpn-15-mt-book/sec-flex-spoke.html
upvoted 1 times
...
...
Dante8880
1 year, 1 month ago
The hub sends out an NHRP redirect message to spoke1 on virtual access interface1. On receiving the redirect, Spoke1 initiates a resolution request for Host2 over the point-to-point tunnel interface (the same interface over which it received the redirect). The resolution request traverses the routed path (Spoke1-hub-spoke2). On receiving the resolution request, Spoke2 determines that it is the exit point and needs to respond to the resolution request. https://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/15-2mt/sec-flex-spoke.html#GUID-2762C965-B052-4876-8F9A-2ACCEF05BBE4
upvoted 1 times
...
NullNull88
1 year, 2 months ago
A and C can be eliminated because the HUB = Redirects and Spokes = Shortcuts Not the other way around
upvoted 1 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...