Exam 200-301 topic 1 question 902 discussion

I think it's a typo in C, it should be ::/64, it's missing /.

router interface with an ipv6 address provide automaticaly addressing for hosts with slaac,. It work in Packet Tracer.

Shouldnt eui 64 have fffe in the addresse?

D is correct

C is correct

C is correct

Tested in the lab. The correct answer is C considering there is a typo. The command should be ipv6 address 2001:DB8:FFFF:FCF3::/64 eui-64. There must be a type on selection C.

Option ‘c’ is almost correct. Option ‘a’ is incorrect. It assigns a static LLA to the interface (128 bits defined). Option ‘b’ is incorrect. This assigns a static GUA to the interface (128 bits defined). Option ‘c’ is incorrect. It is attempting to assign an IPv6 address, and add eui-64 to the end Option ‘d’ is incorrect. There are no options to the command ipv6 address autoconfig. However, imagine option ‘c’ had a typo; it is missing a ‘/’ before the 64. Now, it would read: ipv6 address 2001:DB8:FFFF:FCF3::/64 eui-64 Then, option ‘c’ is correct.

I did in the packet tracer, letter "C" is wrong because the prefix "/" is missing the correct answer is letter "B" configuring the IP 2001:DB8:FFFF:FCF3::1/64 the router will provide a dynamic assignment via SLAAC as proposed in the statement. I did it in packet tracert and the hosts got IP automatically via SLAAC.

2001:DB8:FFFF:FCF2::/64. This command enables stateless autoconfiguration on the interface Gig0/0 of R1, which allows the interface to automatically generate its own IPv6 address based on the network prefix and the MAC address of the device.

Answer C is correct

The correct answer : C

The correct answer it's B.

B is correct in C there is missing ///