Exam 200-301 All Questions

View all questions & answers for the 200-301 exam

Exam 200-301 topic 1 question 1045 discussion

Actual exam question from Cisco's 200-301

Question #: 1045
Topic #: 1

Refer to the exhibit. A network administrator configures the CPE to provide internet access to the company headquarters. Traffic must be load-balanced via ISP1 and ISP2 to ensure redundancy.
Which two command sets must be configured on the CPE router? (Choose two.)

A. ip route 0.0.0.0 0.0.0.0 198.51.100.1 255
ip route 0.0.0.0 0.0.0.0 203.0.113.1 255
ip route 128.0.0.0 128.0.0.0 203.0.113.1
B. ip route 0.0.0.0 128.0.0.0 198.51.100.1
ip route 128.0.0.0 128.0.0.0 203.0.113.1
ip route 0.0.0.0 0.0.0.0 198.51.100.1
ip route 0.0.0.0 0.0.0.0 203.0.113.1
C. ip route 0.0.0.0 0.0.0.0 198.51.100.1
ip route 0.0.0.0 0.0.0.0 203.0.113.1
D. ip route 0.0.0.0 128.0.0.0 198.51.100.1
ip route 128.0.0.0 128.0.0.0 203.0.113.1
E. ip route 0.0.0.0 0.0.0.0 198.51.100.1
ip route 0.0.0.0 0.0.0.0 203.0.113.1 2

Show Suggested Answer

Suggested Answer: C 🗳️

by oatmealturkey at Feb. 15, 2023, 4:05 p.m.

Comments

Submit Cancel

sdmejia01

Highly Voted 2 years, 2 months ago

I think it shouldn't be 2 answers. Answer C would work as intended in the question.

upvoted 17 times

...

xbololi

Highly Voted 1 year, 9 months ago

Helpful reminder, if you didn't understand what the heck is this; Answer B is equal to C+D soooo Just memorize this and you will answer this sh!t question at exam without any problem. You welcome.

upvoted 9 times

tumajay

1 year ago

question says choose 2. so i will pick C and D

upvoted 1 times

...

FlacoX

Most Recent 4 months, 2 weeks ago

Selected Answer: C

It says 2 commands, b has 3

upvoted 1 times

...

exiledwl

7 months ago

Selected Answer: C

C meets the requirements in full, you can check in lab This is obviously not meant to be a pick 2 question, many typos on this practice

upvoted 2 times

...

bugmenot240410

1 year ago

Selected Answer: C

Can't be A and E because of it entered metric. divide traffic with /1 probably not real load balancing, it sends packets not equally.

upvoted 1 times

...

[Removed]

1 year ago

Selected Answer: C

I think the only correct Answer is C because it will load balance the traffic, and if one becomes down the other one will automatically provide redundancy. but if i MUST choose 2 then i´ll choose C & E

upvoted 6 times

...

squagmire

1 year, 1 month ago

i suppose its A and C

upvoted 1 times

...

Stevens0103

1 year, 9 months ago

Selected Answer: B

The goal is to load-balance traffic between the two ISPs while ensuring redundancy. To achieve this, we need to divide the entire IP address space into two halves and send each half to a different ISP. This is typically done using a technique called "BGP Dual-Homed" setup, where the company headquarters announces two routes: one for the first half of the IP address space (0.0.0.0/1) to ISP1, and the other for the second half (128.0.0.0/1) to ISP2. Option B: Two default routes are configured for each ISP. The first half of the IP address space (0.0.0.0/1) goes to ISP1, and the second half (128.0.0.0/1) goes to ISP2.

upvoted 4 times

Stevens0103

1 year, 9 months ago

Selected Answer: D Option D: This option also divides the IP address space between the two ISPs using the /1 subnet mask. Both of these options provide load-balancing and redundancy, ensuring that traffic is distributed across both ISPs.

upvoted 1 times