Exam 300-135 topic 20 question 3 discussion

Actual exam question from Cisco's 300-135

Question #: 3
Topic #: 20

The implementations group has been using the test bed to do a "˜proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at
209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?

A. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
B. Under the ip access-list extended edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command.
C. Under the ip access-list extended edge_security configuration delete the deny ip 10.0.0.0.0 0.255.255.255 any command.
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access-group edge_security out command.

Show Suggested Answer

Suggested Answer: B 🗳️
On R1, we need to permit IP 209.65.200.222/30 under the access list.

by diegonamaste at Dec. 8, 2019, 7:28 p.m.

Comments

Submit Cancel

diegonamaste

5 years, 6 months ago

209.65.200.224/30 is the correct subnet to permit

upvoted 2 times

...