Exam 1Y0-231 topic 1 question 28 discussion

Actual exam question from Citrix's 1Y0-231

Question #: 28
Topic #: 1

Scenario: A Citrix Administrator configures an access control list (ACL) to block traffic from the IP address 10.102.29.5: add simpleacl rule1 DENY -srcIP 10.102.29.5
A week later, the administrator discovers that the ACL is no longer present on the Citrix ADC.
What could be the reason for this?

A. The administrator did NOT run the apply ACL command.
B. The simple ACLs remain active for only 600 seconds.
C. The simple ACLs remain active for only 60 seconds.
D. The Citrix ADC has been restarted without saving the configurations.

Show Suggested Answer

Suggested Answer: D 🗳️

by testmenowjp at Oct. 22, 2022, 6:33 p.m.

Comments

Submit Cancel

4f6bb17

1 year ago

Selected Answer: D

Important is "the ACL is no longer present". Only if the config is saved, the ACL is in the ns.config but if the ACL is not present anymore, it was not saved and got lost during reboot.

upvoted 1 times

...

RDIO

1 year, 11 months ago

Selected Answer: C

C. 600sec=10min simple acl cannot deny based on IP destination. https://docs.citrix.com/en-us/citrix-adc/current-release/networking/access-control-lists-acls/simple-acls-and-simple-acl6s.html Extended ACL can filter based on the destination IP. https://docs.citrix.com/en-us/citrix-adc/current-release/networking/access-control-lists-acls/extended-acls-and-extended-acl6s.html

upvoted 2 times