exam questions

Exam 220-1101 All Questions

View all questions & answers for the 220-1101 exam

Exam 220-1101 topic 1 question 439 discussion

Actual exam question from CompTIA's 220-1101
Question #: 439
Topic #: 1
[All 220-1101 Questions]

A user with a self-configured, static IP address cannot connect to the Internet. The technician runs an ipconfig command and receives the following output:



Which of the following should the technician edit?

  • A. IPv4 address
  • B. Subnet mask
  • C. DHCP server
  • D. Default gateway
Show Suggested Answer Hide Answer
Suggested Answer: B 🗳️

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
JonHin
2 months, 1 week ago
Selected Answer: B
The correct answer is D. Default gateway. A default gateway is the device that connects a local network to other networks, such as the internet. A default gateway is usually a router or a modem that has an IP address on the same subnet as the local network. A default gateway is necessary for a device to communicate with devices outside its local network. In this case, the user has a self-configured, static IP address of 192.168.1.20, which belongs to the subnet 192.168.1.0/24 (with a subnet mask of 255.255.255.0). However, the default gateway is set to 192.168.0.1, which belongs to a different subnet (192.168.0.0/24). This means that the user’s device cannot reach the default gateway, and therefore cannot connect to the internet
upvoted 1 times
JonHin
2 months, 1 week ago
The technician should edit the default gateway to match the correct subnet of the user’s device, such as 192.168.1.1 or 192.168.1.254, depending on the configuration of the network. Reference: CompTIA A+ Core 1 Sample Questions and Study Guide
upvoted 1 times
JonHin
2 months, 1 week ago
D not B
upvoted 1 times
Rzei
2 months ago
The default gateway is set to 192.168.0.1 ? according to the question, it is set to 192.168.1.1
upvoted 1 times
...
...
...
...
BKnows007
5 months ago
Selected Answer: B
That's a private IP address. So it belongs to a class C subnet mask.
upvoted 1 times
...
Nate_A
5 months, 2 weeks ago
B. a subnet mask of 255.255.255.255 would not allow for internet access. This subnet mask indicates a point-to-point connection, meaning the device with this configuration can only communicate directly with another device on the same link. It cannot reach other networks, including the internet. To access the internet, a device typically needs a default gateway, which is the IP address of a router that can route traffic to other networks. With a subnet mask of 255.255.255.255, there's no room for a network address, so a default gateway cannot be configured.   GG
upvoted 1 times
...
Galdran_111
9 months, 2 weeks ago
Selected Answer: B
It is quite normal for a router to have the same ip address for the DHCP and the default gateway, but it is not normal for a subnet mask to be all 255's
upvoted 2 times
...
MikeNY85
11 months, 1 week ago
Selected Answer: B
Answer is B - Subnet Mask.. 255.255.255.255 is a single host subnet mask that won't let any interaction with other hosts in the network. Note that the default gateway (Router) and DHCP server (Router) implies the same IP address. Hence option B
upvoted 1 times
...
CyberSec99
11 months, 4 weeks ago
Selected Answer: D
User has set incorrect Default gateway IP address
upvoted 1 times
...
Duke_CT
11 months, 4 weeks ago
Should be B
upvoted 1 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago