Exam MD-102 topic 1 question 163 discussion

The "Connect from anywhere" setting allows you to specify the Remote Desktop Gateway server for the connection. You need to provide the following details under this setting: 1.The RD Gateway server's address. 2. Specify whether to use the RD Gateway credentials for the remote server or provide separate credentials. This configuration ensures that your Remote Desktop connection routes through the RD Gateway, enabling secure access to the internal server (Server1) from external networks.

A. Connect from anywhere. mr_Eliot " Run MSTSC.exe and check for your self." Did you check it yourself?! Open mstsc.exe and go to tab "ADVANCED" and see below "CONNECT FROM ANYWHERE: Configure settings to connect through Remote Desktop GATEWAY when I am working remotely"!!!!!!!!!!!

Is more specific

Connect from anywhere: This setting is related to enabling RD Gateway but is not where you configure the actual connection settings for using the gateway. Connection settings: This is where you configure the RD Gateway settings. You need to enter the RD Gateway server address and possibly other details required for connecting through the gateway.

Answer is A. When you click Advanced Tab (mstsc) --> Connect from anywhere and then configure RD Gateway

A if you're configuring the Remote Desktop Connection application (MSTSC.exe) on your local machine to connect through a Remote Desktop Gateway (RD Gateway), you typically need to ensure that the "Connect from anywhere" setting is enabled.

Answer is correct. Run MSTSC.exe and check for your self.

Chatgpt answer is C

Silly question but I'd have to say Connect From Anywhere wins it for me. Within the Connect From Anywhere there are two options, namely, Connection Settings and Logon Settings. If you selected Connection Settings, you'd be ignoring Logon Settings. I think together they both make up the requirement in the question above.

Connect from Anywhere makes more sense here

Well to be fair, I am going with A, Under Connect from Anywhere is "Settings" and NOT Connection Settings

Correct

Stupid question. "Connection settings" is UNDER "Connect from Anywhere" \ "Settings"

SEEMS CORRECT

So is it Connect from anywhere or Connection settings?

Option A, "Connect from anywhere," is a general setting that allows connections from any network. However, when you are specifically dealing with connecting through a Remote Desktop Gateway (RD Gateway), you typically need to configure the RD Gateway server settings. So, for a Remote Desktop connection to go through an RD Gateway, you usually configure the "Connection settings" (Option C), not "Connect from anywhere" (Option A).

Confirmed.