ExamTopics Logo
Mail Us[email protected]
Menu
Microsoft Discussions
exam questions

Exam AZ-103 All Questions

View all questions & answers for the AZ-103 exam
Go to Exam

Exam AZ-103 topic 4 question 49 discussion

Actual exam question from Microsoft's AZ-103
Question #: 49
Topic #: 4
[All AZ-103 Questions]

HOTSPOT -
You have a virtual network named VNet1 that has the configuration shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

Show Suggested Answer Hide Answer
Suggested Answer:
Box 1: add an address space -
Your IaaS virtual machines (VMs) and PaaS role instances in a virtual network automatically receive a private IP address from a range that you specify, based on the address space of the subnet they are connected to. We need to add the 192.168.1.0/24 address space.

Box 2: add a network interface -
The 10.2.1.0/24 network exists. We need to add a network interface.
References:
https://docs.microsoft.com/en-us/office365/enterprise/designing-networking-for-microsoft-azure-iaas https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-static-private-ip-arm-pportal
by rax at March 10, 2020, 9:52 a.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
rax
Highly Voted 5 years, 3 months ago
Box 1: add an address space - Box 2: add a Subnet
upvoted 162 times
roydeen
5 years, 2 months ago
totally agree
upvoted 5 times
...
hungnq
4 years, 10 months ago
exactly,
upvoted 1 times
...
Gatospazialle
4 years, 5 months ago
Exactly, however I want to add that if the subnet on the powershell output would have been 10.2.1.0/24 ( instead of 10.2.0.0/24) the answer given would be ok.
upvoted 2 times
...
Kinon4
4 years, 3 months ago
correct
upvoted 1 times
...
Load full discussion...
...
dsmanneke
Highly Voted 5 years, 3 months ago
The 10.2.1.0/24 network does not exists. only the 10.2.0.0/24 subnet & 10.2.0.0/16 address space. so you must create a subnet
upvoted 17 times
...
I
Most Recent 4 years, 4 months ago
The answer is correct. Although the question is tricky, but the IP addresses are already exit. Therefore, for the first question with IP address, here should add one address space for it. The second IP address 10.2.1.0/24 belongs to another subnet that is defferent from 10.2.0.0/24, and has been already there. So to get the connection between the two subnets, what should do? Network interface... This question is quite tricky, we should read it very specifically.
upvoted 2 times
...
Thi
4 years, 8 months ago
1. add address space 2. add subnet
upvoted 2 times
...
pugazh25in
4 years, 9 months ago
Box 2 Add a Subnet Because the Subnet does not exists
upvoted 1 times
...
rbnrecio
4 years, 10 months ago
Totally agree with most of other user: Box 1: add an address space Box 2: add a subnet
upvoted 3 times
...
Xtian_ar
4 years, 10 months ago
In both cases the answer would be Add an Address Space, because both address segments do not exist in the vnet configuration, the existent address space does not include any of the other both address. So the first think you have to do in both cases is to add an address space.
upvoted 1 times
Xtian_ar
4 years, 10 months ago
Sorry I was wrong, the second address is included by the existent address space, so the answer for the second one it would be add a Subnet. So 1) add an address space, and 2) add a subnet
upvoted 2 times
...
...
_syamantak
4 years, 11 months ago
For Box 2 it has to be adding a subnet. You can not add a network Interface to a VNet. That wasn't a correct answer
upvoted 2 times
...
Ausias18
4 years, 11 months ago
Nice rax, you are right: Box 1: add an address space Box 2: add a Subnet
upvoted 3 times
...
salm990
5 years ago
address space and add subnet
upvoted 1 times
...
mboukricha
5 years ago
The correct answer is: Box 1: add an address space Box 2: add a Subnet
upvoted 2 times
...
kaviraj
5 years ago
box1: address space box2: has to be subnet unless there is a typo in the question.
upvoted 2 times
...
Cloudyuga
5 years, 1 month ago
Correct answer is 1: add an address space - above image the address space is missing so need to add it 2: add a Subnet - address space is present but need to add subnet
upvoted 3 times
...
P0d
5 years, 2 months ago
Answer: Box1: Add an address space Box2: Add ad address space (without it you cannot add subnet in range) As answered before repeating again. I have tested it in Azure portal many times. We can add many address spaces in certain range and then we can add subnet related to address spaces added. Without certain address we can not add subnet related to address range.
upvoted 2 times
P0d
5 years, 2 months ago
But as we have Address range which can include subnet then second box will be add subnet
upvoted 1 times
...
...
varo82
5 years, 2 months ago
I'm trying from azure portal not from shell but If already have the address space 10.2.0.0/24 I can simply add a subnet 10.2.1.0/24
upvoted 1 times
...
Glennn
5 years, 2 months ago
Sorry that's only for peering. Please disregard my other comment
upvoted 2 times
...
Glennn
5 years, 2 months ago
Perhaps ANOTHER typeo in this unreliable exam. M think you have to recreate the vet if you change the address space.
upvoted 1 times
...
Load full discussion...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel