ExamTopics Logo
Mail Us[email protected]
Menu
Microsoft Discussions
exam questions

Exam MD-101 All Questions

View all questions & answers for the MD-101 exam
Go to Exam

Exam MD-101 topic 3 question 68 discussion

Actual exam question from Microsoft's MD-101
Question #: 68
Topic #: 3
[All MD-101 Questions]

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Directory group named Group1 that contains Windows 10 Enterprise devices and Windows 10 Pro devices.
From Microsoft Intune, you create a device configuration profile named Profile1.
You need to ensure that Profile1 applies to only the Windows 10 Enterprise devices in Group1.
Solution: You create an Azure Active Directory group that contains only the Windows 10 Enterprise devices. You assign Profile1 to the new group.
Does this meet the goal?

  • A. Yes
  • B. No
Show Suggested Answer Hide Answer
Suggested Answer: B 🗳️
by Lomak at Sept. 2, 2020, 3:24 p.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
CvdK
Highly Voted 4 years, 6 months ago
Answer = A Assigning a profile to a group means that only the devices in the group apply the profile settings. This can be filtered further by applying applicability rules but creating applicability rules is optional. In this case the group that the profile was assigned to contains only the intended target devices, so the goal is met (even without applying applicability rules). However creating a new group was unnecessary, instead the original group could have been used with applicability rules. But both options work equaly well to meet the goal.
upvoted 30 times
Anthony_2770
4 years, 5 months ago
Valid point. Voting for A
upvoted 3 times
Anthony_2770
4 years, 4 months ago
I am changing my answer to No. "You need to ensure that Profile1 applies to only the Windows 10 Enterprise devices in Group1." If you create a new group and apply Profile1 to it then you are not applying Profile1 to Group1 but to a new group.
upvoted 14 times
b33droid
4 years, 2 months ago
It doesn't say that you need to apply the profile to group 1 but only to Win 10 Entreprise devices wich are in group 1. So if your new group is a static group and you target "Group 1" as member then you use applicability rules to target windows 10 in this new group as CVdK said it's fine
upvoted 4 times
...
...
...
Layer8
4 years, 1 month ago
only problem is that if there are ever any more W10 Ent machines added to group 1, then the configuration profile no longer applies to all the machines you intend it to.
upvoted 6 times
...
...
4D33L
Most Recent 1 year, 11 months ago
you are playing a dangerous game when you want the answer to be something else. Does A satisfy the objective? yes!!
upvoted 1 times
...
AliNadheer
2 years, 4 months ago
Selected Answer: B
this will do the job but you will have to create a new group and assign policy to it. a better option is add an applicability rule to the policy profile. applicability rule is available when you create configuration profile and choose windows 10 or later and pick a template like domain join, you should see the applicability rule near the end of profile creation. since profile 1 already exists and its for windows 10 you can edit the profile and add applicability rule (assign profile if > OS Edition > windows10/11 enterprise). however I'm not use if this shows on every templates or on specific policies. but i think this is good enough for me.
upvoted 2 times
...
mikejones99
2 years, 6 months ago
B --> You need to ensure that Profile1 applies to ONLY the Windows 10 Enterprise devices in Group1
upvoted 1 times
...
JN_311
2 years, 6 months ago
Selected Answer: B
Voting B No
upvoted 1 times
...
raduM
2 years, 8 months ago
answer is no because if you create a dynamic profile which filters the enterprise devices, the dynamic group will have all the devices in the company that have windows enterprise, not just the ones in group 1
upvoted 1 times
BRoald
2 years, 6 months ago
It doenst mention dynamic groups everywhere. Basically if you have a group with all W10 Enterprise devices (if you know which device is Enterprise), then this does meet the goal. No its not effecient at all and nobody will do it this way, but it does meet the goal what the question states
upvoted 1 times
...
...
raduM
2 years, 10 months ago
i would go with yes here. Why not?
upvoted 1 times
...
jaroti2116
2 years, 11 months ago
Dynamic Profile
upvoted 1 times
...
Alejack
2 years, 12 months ago
Solution states: You create an Azure Active Directory group that contains only the Windows 10 Enterprise devices. You assign Profile1 to the new group. A is the correct answer.
upvoted 2 times
...
MR_Eliot
3 years, 2 months ago
Selected Answer: A
Does this meet the goal? Yes, it does!
upvoted 2 times
...
Angarali
3 years, 2 months ago
Selected Answer: B
https://docs.microsoft.com/en-us/mem/intune/configuration/device-profile-create
upvoted 1 times
...
morito
3 years, 4 months ago
Selected Answer: A
I believe the correct answer here is yes, even though its quite confusing. Working strictly according to the question, you'd have to assign it to the group, and apply an applicability rule, ensuring that you only catch the devies in the group and further scope it to only match all Windows 10 Enterprise Versions. A good compromise is to simply create a new group with all the devices you want to target.
upvoted 1 times
...
PiPe
3 years, 4 months ago
Selected Answer: B
Applicability rules is obviously what they're asking for. Hence the question states that you need to ensure that Profile1 applies to only the Win10 Ent devices <IN GROUP 1>. Creating a new group works of course, but that's not what the question is asking. So the answer is B.
upvoted 2 times
ken2ut
3 years, 1 month ago
Umm the question literally states "Does this meet the goal?". Well it sure hell does. A is the answer
upvoted 2 times
...
...
mayleni
3 years, 5 months ago
Selected Answer: B
with a new group you can achieve the goal but you need to extra admin work.... so i vote B
upvoted 1 times
jcgm1990
2 years, 12 months ago
question here does not state minimum work, read carefully, it states if it meats the goal
upvoted 1 times
...
...
IykeP
3 years, 5 months ago
Selected Answer: B
This is a tricky question. From Microsoft Intune, you create a device configuration profile named Profile1. You need to ensure that Profile1 applies to only the Windows 10 Enterprise devices in Group1. Since you are already in Microsoft Intune, with less Admin effort, the best thing will be to use "Applicability rules".
upvoted 1 times
morito
3 years, 4 months ago
I disagree with this. Using Applicability rules will scope the deployment to all Windows 10 Enterprise Devices Enrolled in Intune, however the question specifically wants it assigned to all Windows Enterprise devices in a specific group.
upvoted 1 times
...
...
IykeP
3 years, 5 months ago
Selected Answer: A
Correct Answer is A
upvoted 1 times
...
[Removed]
3 years, 8 months ago
To much assumtions WHAT/IF... I'll write important parts - will not write garbage information - stated as it is: We have: "Azure Directory group ... Group1 ... contains Windows 10 Enterprise devices and Windows 10 Pro devices" So we have Pro and Enterprise devices in Group1. Goal: "... ensure ... Profile1 applies to only the Windows 10 Enterprise devices in Group1." We want to apply Profile1 to Enterprise devices only. Solution: "... create an Azure Active Directory group that contains only the Windows 10 Enterprise devices. You assign Profile1 to the new group." QUESTIONS (not sure): Only question I have (from the "Solution") from which you want make different assumptions: I assume that created group contains only the Windows 10 Enterprise Devices FROM THE GROUP1? -------------------------------------- Answer should be A? Why do you thing answer A would not me the goal?
upvoted 1 times
HellRaver80
3 years, 8 months ago
"'You assign Profile1 to the new group." So not to group1
upvoted 1 times
...
...
Load full discussion...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel