exam questions

Exam AZ-303 All Questions

View all questions & answers for the AZ-303 exam

Exam AZ-303 topic 5 question 55 discussion

Actual exam question from Microsoft's AZ-303
Question #: 55
Topic #: 5
[All AZ-303 Questions]

HOTSPOT -
You have an Azure subscription named Subscription1.
You have a virtualization environment that contains the virtualization servers in the following table.

The virtual machines are configured as shown in the following table.

All the virtual machines use basic disks. VM1 is protected by using BitLocker Drive Encryption (BitLocker).
You plan to use Azure Site Recovery to migrate the virtual machines to Azure.
Which virtual machines can you migrate? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Show Suggested Answer Hide Answer
Suggested Answer:
Incorrect Answers:
VM1 cannot be migrates as it has BitLocker enabled.
VM2 cannot be migrates as the OS disk on VM2 is larger than 2TB.
VMC cannot be migrates as the Data disk on VMC is larger than 4TB.
References:
https://docs.microsoft.com/en-us/azure/site-recovery/hyper-v-azure-support-matrix#azure-vm-requirements

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
acasella
Highly Voted 4 years, 2 months ago
Be careful! it's not the same as question 23. In the previous ones, server 1 is vm-ware and server 2 is hyper-V. In this case is the opposite. vm-ware support up to 32 TB for data disks: https://docs.microsoft.com/en-us/azure/migrate/migrate-support-matrix-hyper-v-migration So correct answer is VM-A,VM-B,VM-C
upvoted 28 times
azprepd
4 years, 1 month ago
Azure Migrate and Azure Site Recovery are two different migration options: https://docs.microsoft.com/en-us/azure/site-recovery/migrate-overview. For example, for Hyper-V: https://docs.microsoft.com/en-us/azure/migrate/migrate-support-matrix-hyper-v-migration vs https://docs.microsoft.com/en-us/azure/site-recovery/hyper-v-azure-support-matrix#azure-vm-requirements. The migration option doesn't have a difference between 1st and 2nd generation 300GB vs 2TB for Azure system disk and there is the 8Tb limit for the Hyper-V VM data disk The VMWare data disk limitation is relevant to the migration scenario while the exam question is about using Azure Site Recovery (disaster recovery). There is an article regarding the VMWare migration using the ASR, but it doesn't mention the disk limits: https://docs.microsoft.com/en-us/azure/site-recovery/vmware-azure-about-disaster-recovery
upvoted 1 times
azprepd
4 years, 1 month ago
actually, i did find the option for VMWare DR scenario: https://docs.microsoft.com/en-us/azure/site-recovery/vmware-physical-azure-support-matrix. 2TB for Gen1, 2TB for Gen 2. Regarding the data disks: "Up to 32,767 GB when replicating to managed disk (9.41 version onwards) Up to 4,095 GB when replicating to storage account Minimum disk size requirement - at least 1024 MB"
upvoted 2 times
rdemontis
4 years ago
thanks a lot
upvoted 1 times
...
...
pentium75
4 years ago
Actually the documentation is ambigous. https://docs.microsoft.com/en-us/azure/migrate/migrate-support-matrix-hyper-v-migration For the source Hyper-V VM it says: "Disk size: up to 2 TB OS disk, 8 TB for the data disks." But for the destination Azure VM it says: "Data disk size: Up to 4,095 GB" So ... you can migrate VMs with 8 TB disk as long as the disk is not larger than 4 TB ... huh?
upvoted 1 times
Simon_G
3 years, 5 months ago
Maybe this has been updated since you posted. but that page for Hyper-v now says up to 4, not 8, for data disk. "Disk size: up to 2 TB OS disk, 4 TB for the data disks." https://docs.microsoft.com/en-us/azure/migrate/migrate-support-matrix-hyper-v-migration
upvoted 1 times
...
...
...
norbitek
4 years, 2 months ago
What about VM3. In my opinion it meets requirements for HyperV migration as well
upvoted 1 times
pentium75
4 years ago
Yes, it does. Not encrypted, OS disk < 300 GB, data disk < 2 TB.
upvoted 1 times
...
...
ZetaZeti
4 years, 2 months ago
You're right, acasella. Vm-ware and Hyper-V are inverted compared to question 23 and also question 52. Vmware limits: 2 TB OS and 32 TB data Hyper-V limits: 2 TB OS and 8 TB data So: VM3 VMA-VMB-VMC
upvoted 5 times
El_Hechizo
4 years ago
Hyper-V 2 TB OS and 4 TB data
upvoted 3 times
...
...
crazyaboutazure
4 years ago
Correct answer for second is VM - A, VM - B, VM - C as for VMWare migration Disk size up to 2 TB OS disk for gen 1 VM and gen 2 VMs; 32 TB for data disks.
upvoted 7 times
...
...
scorpion20047
Highly Voted 4 years, 6 months ago
repeated question
upvoted 6 times
pentium75
4 years ago
no, this time VMware / Hyper-V switched
upvoted 2 times
...
Aghora
4 years, 6 months ago
number 13 so far
upvoted 3 times
...
...
pentium75
Most Recent 4 years ago
The question is a bit weird as it's asking about 'using Azure Site Recovery to migrate', while you'd typically use Azure Site Recovery for DR purposes and Azure Migrate for migrating. But anyway. VM1 = No. Would meet specs but uses Bitlocker. VM2 = No. OS disk too big, max. 2 TB for Hyper-V Gen 1. VM3 = Yes. OS disk < 300 GB, data disk < 4 TB, no encryption. VMA = Yes. OS disk < 2 TB, data disk < 32 TB, no encryption. VMB = Yes. OS disk < 2 TB, data disk < 32 TB, no encryption. VMC = Yes. OS disk < 2 TB, data disk < 32 TB but > 4 TB, no encryption. Can be migrated with Managed Disks (not with disks in Storage Account).
upvoted 2 times
Pinto
4 years ago
Where do you get the info of size for encrypted and not encrypted disks?
upvoted 1 times
...
...
Linus0
4 years ago
https://docs.microsoft.com/en-us/azure/site-recovery/vmware-physical-azure-support-matrix OS disk size: Up to 2,048 GB for Generation 1 machines. (BIOS boot type) Up to 4,095 GB for Generation 2 machines. (EFI boot type) Data disk size: Up to 32,767 GB when replicating to managed disk (9.41 version onwards) Up to 4,095 GB when replicating to storage account Minimum disk size requirement - at least 1024 MB So can VM2 be migrated using Gen2 machines? How do we know the VM2 (red hat) is not EFI boot type?
upvoted 2 times
pentium75
4 years ago
VM2 is Hyper-V Generation 1, which uses BIOS boot. Generation 2 uses EFI boot.
upvoted 1 times
...
...
Kraviecc
4 years, 6 months ago
Correct
upvoted 3 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...