ExamTopics Logo
Mail Us[email protected]
Menu
Microsoft Discussions
exam questions

Exam 70-741 All Questions

View all questions & answers for the 70-741 exam
Go to Exam

Exam 70-741 topic 2 question 4 discussion

Actual exam question from Microsoft's 70-741
Question #: 4
Topic #: 2
[All 70-741 Questions]

You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.
You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named Internal and Internet. Internet connects to an
Internet Service Provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
You need to provide Internet connectivity for the client computers.
What should you do?

  • A. On Server2, select the Internet and Internal network adapters and bridge the connections. From the DHCP console on Server1, authorize Server2.
  • B. On Server1, stop the DHCP server. On the Internal network adapter on Server2, enable Internet Connection Sharing (ICS).
  • C. On Server2 run the New-NetNat ""Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10.
  • D. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.
  • E. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 131.107.0.10.
  • F. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address space. On Server2, change the IP address of the internal network adapter to 131.107.0.1. Configure Server1 to provide the 003 Router option of 131.107.0.1.
Show Suggested Answer Hide Answer
Suggested Answer: C 🗳️
References:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/setup-nat-network https://www.pctips3000.com/add-default-gateway-information-to-dhcp-in-windows-server-2008/
by KFL_ at Oct. 2, 2019, 11:34 a.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
KFL_
Highly Voted 5 years, 7 months ago
Correct awnser should be D.
upvoted 12 times
lbs
5 years, 1 month ago
Agree. Answer should be D.
upvoted 4 times
...
...
coleman
Highly Voted 5 years, 5 months ago
the answer should be : D. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.
upvoted 7 times
coleman
5 years, 5 months ago
Explanation/Reference: "Server2 has two network adapters named Internal and Internet." indicates it is a good server for implementing NAT for clients behind it to access Internet. NAT clients then must send packets to NAT Server's private interface 192.168.1.250 first, therefore Answer B - configuring 192.168.1.250 as all NAT client's default gateway address is correct.
upvoted 5 times
rohw
5 years, 2 months ago
Did you mean D? Answer B doesn't mention anything about the gateway.
upvoted 3 times
TA77
4 years, 7 months ago
Yes, he meant answer D. The right answer is D.
upvoted 1 times
...
...
...
...
panda
Most Recent 4 years, 5 months ago
I think D is correct. https://www.itechguides.com/windows-server-2016-router-configuration/
upvoted 1 times
...
algerianphoenix
4 years, 9 months ago
It has to be Answer D. Since any client must have its gateway on the same network as it has.
upvoted 1 times
...
alexnt
4 years, 9 months ago
I found another variant What should you do? A. On Server2 run The New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 192.168.1.250. B. On Server2 run the New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10. C. On Server1, stop the DHCP server. On the Internet network adapter on Server2, enable Internet Connection Sharing (ICS). D. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address space. On Server2, change the IP address of the internal network adapter to 131.107.0. 1. Configure Server 1 to provide the 003 Router option of 131.107.0. 1. Offered Answer: A What do you think?
upvoted 1 times
alexnt
4 years, 9 months ago
Sorry for the above, doesn't look as should. Here it is again: What should you do? A. On Server2 run The New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 192.168.1.250. B. On Server2 run the New-NetNat -Name NAT1 -InternallPlnterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10. C. On Server1, stop the DHCP server. On the Internet network adapter on Server2, enable Internet Connection Sharing (ICS). D. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address space. On Server2, change the IP address of the internal network adapter to 131.107.0. 1. Configure Server 1 to provide the 003 Router option of 131.107.0. 1. Offered Answer: A What do you think?
upvoted 1 times
...
...
Kamikazekiller
4 years, 10 months ago
Correct answer: D
upvoted 1 times
...
inf_ph
4 years, 10 months ago
Same as Question #122. Correct answer: D.
upvoted 2 times
...
Ario
5 years, 2 months ago
D is correct
upvoted 3 times
...
imsreeni
5 years, 3 months ago
this is arepeated q somewhere in 50s answer isD
upvoted 2 times
...
Nhan
5 years, 3 months ago
I also Agree with D
upvoted 3 times
...
xziomal9
5 years, 5 months ago
Correct answer: D
upvoted 3 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago