ExamTopics Logo
Mail Us[email protected]
Menu
Microsoft Discussions
exam questions

Exam 70-741 All Questions

View all questions & answers for the 70-741 exam
Go to Exam

Exam 70-741 topic 2 question 30 discussion

Actual exam question from Microsoft's 70-741
Question #: 30
Topic #: 2
[All 70-741 Questions]

You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.
You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named Internal and Internet. Internet connects to an
Internet Service Provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
You need to provide Internet connectivity for the client computers.
What should you do?

  • A. On Server1, stop the DHCP server. On the Internal network adapter on Server2, enable Internet Connection Sharing (ICS).
  • B. On Server2 run the New-NetNat ""Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 192.168.1.250.
  • C. On Server1, stop the DHCP server. On the Internet adapter on Server2, enable internet Connection Sharing (ICS).
  • D. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address space. On Server2, change the IP address of the internal network adapter to 131.107.0.1. Configure Server1 to provide the 003 Router option of 131.107.0.1.
  • E. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.
Show Suggested Answer Hide Answer
Suggested Answer: B 🗳️
References:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/setup-nat-network https://www.pctips3000.com/add-default-gateway-information-to-dhcp-in-windows-server-2008/
by KFL_ at Oct. 2, 2019, 12:30 p.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
KFL_
Highly Voted 5 years, 7 months ago
Answer should be E. Currently the Routing role is not present on Server 2.
upvoted 12 times
KFL_
5 years, 7 months ago
Also check https://protechgurus.com/configure-lan-routing-windows-server-2016/ for more information.
upvoted 1 times
...
...
coleman
Highly Voted 5 years, 5 months ago
the answer should be : E. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.
upvoted 5 times
coleman
5 years, 5 months ago
Explanation/Reference: "Server2 has two network adapters named Internal and Internet." indicates it is a good server for implementing NAT for clients behind it to access Internet. NAT clients then must send packets to NAT Server's private interface 192.168.1.250 first, therefore Answer B - configuring 192.168.1.250 as all NAT client's default gateway address is correct. . . . .
upvoted 2 times
Jacky2020
4 years, 9 months ago
What are you talking about? Answer B?
upvoted 1 times
...
cjake2299
4 years, 4 months ago
Except the question does not state the ROuting and Remote Access Role is already installed, which is required to even setup NAT. E is the correct answer in this instance.
upvoted 1 times
...
...
...
GoldenFox
Most Recent 4 years, 4 months ago
Same as questions Q.122 and Q.4
upvoted 1 times
...
TA77
4 years, 7 months ago
Routing role service is required for NAT. Answer is E.
upvoted 1 times
...
Kamikazekiller
4 years, 10 months ago
E. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.
upvoted 1 times
...
Ario
5 years, 2 months ago
E is correct answer
upvoted 1 times
...
Nhan
5 years, 3 months ago
E is correct answer NAt must be enable wit routing protocol on the 192.168.0.250 which will make 192.168.0250 become default gateway
upvoted 2 times
...
xziomal9
5 years, 5 months ago
Correct answer: E
upvoted 1 times
...
ShockwaveXYZ
5 years, 5 months ago
The answer is most definitely E. NAT requires the Routing and Remote Access server role installed to work. The question doesnt state wether the server has the role installed.
upvoted 3 times
...
MrRiver
5 years, 6 months ago
i'm really cofused about this question ... technically b would work i guess, although is meant for NAT-ing Virtua Maschines with hyper-V ... maybe this scenario is not officaly supported E is correct ... https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/setup-nat-network
upvoted 3 times
...
weng
5 years, 7 months ago
Answer: E
upvoted 3 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago