Exam AZ-104 All Questions

View all questions & answers for the AZ-104 exam

Exam AZ-104 topic 3 question 44 discussion

Actual exam question from Microsoft's AZ-104

Question #: 44
Topic #: 3

HOTSPOT -
You have an Azure Storage account named storage1 that stores images.
You need to create a new storage account and replicate the images in storage1 to the new account by using object replication.
How should you configure the new account? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Show Suggested Answer

Suggested Answer:

Reference:
https://docs.microsoft.com/en-us/azure/storage/blobs/object-replication-overview

by Ewong at April 21, 2022, 10:49 a.m.

Comments

Submit Cancel

Ewong

Highly Voted 3 years, 2 months ago

Account type: StorageV2 or BlobStorage only Object type to create in the new account: Container Object Replication supports General Purpose V2 and Premium Blob accounts. Blob versioning should be enabled on both the source and destination storage account. Change feed is enabled on the source storage account.

upvoted 91 times

[Removed]

2 years, 6 months ago

Object replication is supported by Storage V2 and Premium Block Blob storage. Legacy Block blob storage does not support object replication. BlobStorage specifically refers to Legacy Block Blob storage while Premium Block Blob storage is always referenced as BlockBlobStorage. In short we can only use StorageV2 in this case.

upvoted 23 times

ggogel

1 year, 6 months ago

I agree. StorageV2 only Container

upvoted 3 times

...

[Removed]

2 years, 6 months ago

Correction: BlobStorage specifically refers to Legacy Blob storage

upvoted 5 times

...

tableton

1 year, 2 months ago

Don't agree Account type: StorageV2 only Object replication is supported for general-purpose v2 storage accounts and premium block blob accounts Blobstorage is not premium Object replication is supported for general-purpose v2 storage accounts and premium block blob accounts

upvoted 5 times

tableton

1 year, 2 months ago

Extracted from https://learn.microsoft.com/en-us/azure/storage/blobs/object-replication-overview

upvoted 1 times

...

majerly

Highly Voted 2 years, 8 months ago

today in exam 1) Account type: "StorageV2 or Blobstorage only" 2) Object type to create in the new account: "Container"

upvoted 34 times

Rams_84zO6n

2 years, 3 months ago

The answer for (1) is incorrect. It should be "Storage V2 only". https://docs.microsoft.com/en-us/azure/storage/blobs/lifecycle-management-overview#rule-actions Object replication is supported for general-purpose v2 storage accounts and premium block blob accounts. Blob Storage is standard blob account, not premium.

upvoted 10 times

...

Firststack

Most Recent 4 months, 2 weeks ago

The giving answer is correct - https://learn.microsoft.com/en-us/azure/storage/blobs/object-replication-overview

upvoted 2 times

...

Bravo_Dravel

4 months, 4 weeks ago

Account type: StorageV2 only it is only available for General-purpose v2 storage accounts and premium block blob accounts Object type to create in the new account: Container

upvoted 1 times

...

[Removed]

7 months, 3 weeks ago

CORRECT

upvoted 2 times

...

[Removed]

9 months, 2 weeks ago

WRONG Account type: StorageV2 only Object type: Container Object replication is supported for general-purpose v2 storage accounts and PREMIUM block blob accounts. Blob Storage mentioned here is not premium. https://learn.microsoft.com/en-us/azure/storage/blobs/object-replication-overview#:~:text=Object%20replication%20is%20supported%20for%20general%2Dpurpose%20v2%20storage%20accounts%20and%20premium%20block%20blob%20accounts.

upvoted 2 times

[Removed]

7 months, 3 weeks ago

ignore this, after some researches, i found out that both General-purpose v2 (GPv2) and Blob Storage are supported for object replication. given answer is CORRECT

upvoted 2 times

...

Y2

10 months, 3 weeks ago

Hi guys just passed the exam with a 886!! most of the questions were from here, but there were new questions mainly about encryption, keys and container commands (creating and applying a image to one). A WHOLE NEW case study on keys, encryption(Win and Linux VM's with different disks and they asked which ones can be encrypted, attribute assignment roles (go over) There was also one question that asked what's the easiest way to give a v-net and your home network access to a storage account without using p2s. - Confusion!!!! Here some of the questions I remember (please note you questions will not be exactly the same) I have my page setup to show 50 questions per page -

upvoted 2 times

Y2

10 months, 3 weeks ago

1.26,36 2.25 3.68 4.26,31,41,43,44,48,49,53,57,59(different question but same reasoning) 5.68,84,9,14,16,17,18,19 6.24.27,29,49,55, 7.72,95,1 8.20,22,49 9.90,94 10.32,41 And connection monitor question from here that asked how many you need - there were 2 regions so I said 2

upvoted 3 times

Y2

10 months, 3 weeks ago

Note - if you open MLearn close it wait 4-5 sec's before you get to the next question My exam crashed 3 times before I tried this Good luck!!!!!!!

upvoted 2 times

...

tashakori

1 year, 3 months ago

Account type: StorageV2 or BlobStorage only Object type: Container

upvoted 1 times

bobothewiseman

1 year, 3 months ago

Object replication supports general-purpose v2 storage and premium block blob accounts. not Blob Storage

upvoted 3 times

...

MOSES3009

1 year, 7 months ago

Not right answer. IMHO, there must be StorageV2 only Container

upvoted 7 times

SgtDumitru

1 year, 6 months ago

Agree, only StorageV2 & BlockBlobStorage(Premium Block Blobs) supports object replication.

upvoted 3 times

...

athli

1 year, 8 months ago

Object replication is supported for general-purpose v2 storage accounts and premium block blob accounts. Both the source and destination accounts must be either general-purpose v2 or premium block blob accounts. Object replication supports block blobs only; append blobs and page blobs aren't supported.

upvoted 3 times

...

Aniruddha_dravyakar

1 year, 9 months ago

Account type: StorageV2 or BlobStorage only-- since requirement is to store image Object type to create in the new account: Container containers can store image

upvoted 1 times

...

Mehedi007

1 year, 10 months ago

1) StorageV2 only. Because 'Blobstorage' is a legacy storage a/c type. 'BlockBlobstorage' is a premium storage a/c type which supports object replication. "Object replication is supported for general-purpose v2 storage accounts and premium block blob accounts." https://learn.microsoft.com/en-us/azure/storage/blobs/object-replication-overview#prerequisites-and-caveats-for-object-replication 2) Container

upvoted 8 times

Mehedi007

1 year, 10 months ago

Find 'Blobstorage' & 'BlockBlobstorage' here. https://learn.microsoft.com/en-us/azure/templates/microsoft.storage/storageaccounts?pivots=deployment-language-arm-template#storageaccounts-1

upvoted 1 times

...

RandomNickname

1 year, 11 months ago

Answer incorrect Blob is legacy and not block blob which is premium Q1:StorageV2 Q2:Container See; https://learn.microsoft.com/en-us/azure/storage/blobs/object-replication-overview "Object replication is supported for general-purpose v2 storage accounts and premium block blob accounts. Both the source and destination accounts must be either general-purpose v2 or premium block blob accounts. Object replication supports block blobs only; append blobs and page blobs aren't supported."

upvoted 9 times

...

Driede

2 years, 2 months ago

The Account Type should be "SorageV2 only". As stated in https://learn.microsoft.com/en-us/azure/storage/common/storage-account-create?tabs=azure-powershell BlobStorage refers to legacy blob storage which does not support object replication.

upvoted 5 times

...

NJTH

2 years, 2 months ago

Exactly the same question was on todays exam. (7th April 2023)

upvoted 9 times

...

AzZnLuVaBoI

2 years, 2 months ago

On the Exam 3/29/23.

upvoted 9 times

...

AK4U_111

2 years, 3 months ago

StorageV2 only Container "Object replication is supported for general-purpose v2 storage accounts and premium block blob accounts. Both the source and destination accounts must be either general-purpose v2 or premium block blob accounts. " Source: https://learn.microsoft.com/en-us/azure/storage/file-sync/file-sync-deployment-guide?tabs=azure-portal%2Cproactive-portal#create-a-sync-group-and-a-cloud-endpoint

upvoted 12 times

...

Load full discussion...