ExamTopics Logo
Mail Us[email protected]
Menu
Microsoft Discussions
exam questions

Exam AZ-800 All Questions

View all questions & answers for the AZ-800 exam
Go to Exam

Exam AZ-800 topic 3 question 1 discussion

Actual exam question from Microsoft's AZ-800
Question #: 1
Topic #: 3
[All AZ-800 Questions]

You have a server named Host1 that has the Hyper-V server role installed. Host1 hosts a virtual machine named VM1.
You have a management server named Server1 that runs Windows Server. You remotely manage Host1 from Server1 by using Hyper-V Manager.
You need to ensure that you can access a USB hard drive connected to Server1 when you connect to VM1 by using Virtual Machine Connection.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. From the Hyper-V Settings of Host1, select Allow enhanced session mode.
  • B. From Virtual Machine Connection, select Show Options, and then select the USB hard drive.
  • C. From Virtual Machine Connection, switch to a basic session.
  • D. From Disk Management on Host1, select Rescan Disks.
  • E. From Disk Management on Host1, attach a virtual hard disk.
Show Suggested Answer Hide Answer
Suggested Answer: AB 🗳️
by georgecuba at April 29, 2022, 7:30 a.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
AvoKikinha
Highly Voted 3 years, 1 month ago
Selected Answer: AB
Correct A + B
upvoted 15 times
...
georgecuba
Highly Voted 3 years, 1 month ago
I believe B + D are correct
upvoted 6 times
AvoKikinha
3 years, 1 month ago
From: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/learn-more/use-local-resources-on-hyper-v-virtual-machine-with-vmconnect As you can see on link in "Choose a local resource" section Open VMConnect. Select the virtual machine that you want to connect to. Click Show options. Select Local resources. Click More. Select the drive that you want to use on the virtual machine and click Ok. A+B are the correct
upvoted 9 times
...
Starburst
2 years, 10 months ago
Why???
upvoted 2 times
...
...
stonwall12
Most Recent 5 months, 2 weeks ago
Selected Answer: AB
Answer: A and B To enable USB device redirection in a Hyper-V virtual machine connection from a remote management server: A. Enable enhanced session mode on Host1 (option A) because: - Enhanced sessions are required for device redirection - This setting must be configured on the Hyper-V host B. Select the USB drive from Virtual Machine Connection options because: - After enhanced session mode is enabled, devices can be selected for redirection - This allows the VM to access the USB drive connected to Server1 Reference: https://learn.microsoft.com/en-us/windows-server/virtualization/hyper-v/learn-more/use-local-resources-on-hyper-v-virtual-machine-with-vmconnect
upvoted 1 times
...
sardonique
10 months, 2 weeks ago
A and B, Tested in LAB, A because it allows the local resources to be exposed to the VMs, B because you would get the same options as RDP where you can choose PlugPlay devices, local hard disks, and so on (you can even pass your microphone to the VM)
upvoted 2 times
...
fbx01
1 year, 4 months ago
Selected Answer: AB
Correct A + B
upvoted 1 times
...
SanMan_NZ
1 year, 4 months ago
Selected Answer: AB
A + B are correct from my recollection.
upvoted 1 times
...
afridi43
1 year, 9 months ago
Selected Answer: AB
A. This allows enhanced session mode, which can provide USB redirection and other features. B. When connecting to VM1 using VMConnect, you can configure local resources, including USB devices, through the "Show Options" menu. So, the correct actions to perform are A and B, as they allow you to enable enhanced session mode and configure USB device redirection to access the USB hard drive connected to Server1 when connecting to VM1 using VMConnect.
upvoted 3 times
...
syu31svc
2 years, 2 months ago
Selected Answer: AB
A and B are correct as supported by link given
upvoted 4 times
...
Contactfornitish
2 years, 10 months ago
Selected Answer: AB
There are couple of ways to do this but since it's asked that drive should be available when connect via VM connect, A+B is correct. Choose local drive under local resources, no need to re scan
upvoted 5 times
...
VinoTee
3 years, 1 month ago
Correct
upvoted 4 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel