Which MetroCluster configuration procedure is recommended for re-establishing a mirrored volume that was in a level-0 resynchronization state when it failed?
A.
Determine which volumes are at the remote and disaster sites.
B.
Re-create the synchronous mirror.
C.
Rejoin the two volumes.
D.
Turn on power to the cluster node at the disaster site.
Suggested Answer:B🗳️
https://library.netapp.com/ecmdocs/ECMP1210206/html/GUID-A865DB95-9418-4ED2-A993-74F347F674A0.html 1. Validate that you can access the remote storage by entering the following command: aggr status -r Note: A (level-0 resync in progress) message indicates that a plex cannot be rejoined. 2. Turn on the power to the node at the disaster site. After the node at the disaster site boots up, it displays the following: Waiting for giveback...(Press Ctrl-C to abort wait) 3. If the aggregates at the disaster site are online, take them offline by entering the following command for each aggregate that was split: aggr offline disaster_aggr disaster_aggr is the name of the aggregate at the disaster site. Note: An error message appears if the aggregate is already offline. 4. Destroy every target plex that is in a level-0 resync state by entering the following command: aggr destroy plex_name 5. Re-create the mirrored aggregates by entering the following command for each aggregate that was split: aggr mirror aggr_name -v disaster_aggr aggr_name is the aggregate on the surviving sites node. disaster_aggr is the aggregate on the disaster sites node. The aggr_name aggregate rejoins the disaster_aggr aggregate to reestablish the MetroCluster configuration. 6. Enter the following command at the partner node: cf giveback The node at the disaster site reboots.
Currently there are no comments in this discussion, be the first to comment!
This section is not available anymore. Please use the main Exam Page.NS0-155 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
Comments